Jump to content
SAU Community

Recommended Posts

Hi all, hope you all had a good christmas.

recently put a new cat back exhaust on my r34 GTT and am wandering if it needs to be tuned up or anything like that, the car is pretty standard but i feel its using a little more fuel than it should.

Wanting to get a boost controller fitted but heard theyre quite pointless unless the ecu or power fc is upgraded or the old one remapped??? What psi can you run the rb25detneo at before things are needed to be upgraded??

Would love to get it up 350hp to 400hp but am not sure where to start???

In need of some new coilpacks, can you guys recomend any in particular, superspark, jjr, yellowjackets. Dont really want to be forking out $600

Any help will be great, thankyou.

Link to comment
https://www.sau.com.au/forums/topic/301673-mods-and-tuning/
Share on other sites

given your new my recommendation is to find your local club's chapter in perth and attend their club meetings

from there you can meet all the local guys and ask away and find a good suitable workshop

this will save dozens of wasted time, hours, pain and $$$ on crap mods etc

if you cant be bothered doing that, do a search on the tune up threads either in the forced induction section or how to

this type of thread comes up weekly and all the good info, pricing etc is in those threads

Link to comment
https://www.sau.com.au/forums/topic/301673-mods-and-tuning/#findComment-5007092
Share on other sites

Dont bother taking the car to get tuned at this stage. Your next step would be to look at intercooler, and the front half of the exhaust (dump pipe through to Cat convertor). Then look at an Engine management solution (including tuning) Is it manual or automatic? (I haven't had a lot to do with r34's but i believe the Auto transmissions have special circumstances when it comes to ECU changes??) Either way i'm sure somebody else will respond regarding that. (or search the site on the topic)

For boost control, I personally wouldn't bother at this stage (others will argue). Once you change the rest of exhaust and the cooler your boost will creep up not that far from the lower end of the safe limit of the turbo anyway.

For coilpacks. I personally recommend Splitfires. Solved all my missfiring dramas instantly. (never used any other aftermarket brand for compare though).

Cheers. Luke

Link to comment
https://www.sau.com.au/forums/topic/301673-mods-and-tuning/#findComment-5007097
Share on other sites

Dont bother taking the car to get tuned at this stage. Your next step would be to look at intercooler, and the front half of the exhaust (dump pipe through to Cat convertor). Then look at an Engine management solution (including tuning) Is it manual or automatic? (I haven't had a lot to do with r34's but i believe the Auto transmissions have special circumstances when it comes to ECU changes??) Either way i'm sure somebody else will respond regarding that. (or search the site on the topic)

For boost control, I personally wouldn't bother at this stage (others will argue). Once you change the rest of exhaust and the cooler your boost will creep up not that far from the lower end of the safe limit of the turbo anyway.

For coilpacks. I personally recommend Splitfires. Solved all my missfiring dramas instantly. (never used any other aftermarket brand for compare though).

Cheers. Luke

Manual. Ive got 3 inch to the cat, a high flow cat and then 3 inch the rest of the way through and a high flow muffler. also have the apexi pod filter and after doing that the boost has stayed the exact same, i thought it may have creeped up a little but it hasnt done anything.

I think its only pulling around 5-7 psi not a lot, bit pissed off. How can i change that??

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/301673-mods-and-tuning/#findComment-5007111
Share on other sites

Should notice it more after a decent front mount intercooler.

Also for your info regarding being pissed off about 5-7psi. When I got my power fc tuned I got some pre tune results on stock ecu. My 33 made about the same power on 8 psi as it did on 11 psi (except 8psi gave much more midrange power due to ecu). More boost isnt always more power if everything else isnt sorted. If its manual i'd look at a power fc. Although theres options galore these days. If you can make the same power on 9 psi as you can on 12. Go for it, things will last much longer.

Start at page 1 on Forced induction. Flick through the topics until you hit about page 20 or so. You should be able to find a few topics on most of your current questions + future questions there.

Cheers. Luke

Link to comment
https://www.sau.com.au/forums/topic/301673-mods-and-tuning/#findComment-5007130
Share on other sites

Should notice it more after a decent front mount intercooler.

Also for your info regarding being pissed off about 5-7psi. When I got my power fc tuned I got some pre tune results on stock ecu. My 33 made about the same power on 8 psi as it did on 11 psi (except 8psi gave much more midrange power due to ecu). More boost isnt always more power if everything else isnt sorted. If its manual i'd look at a power fc. Although theres options galore these days. If you can make the same power on 9 psi as you can on 12. Go for it, things will last much longer.

Start at page 1 on Forced induction. Flick through the topics until you hit about page 20 or so. You should be able to find a few topics on most of your current questions + future questions there.

Cheers. Luke

Thankyou.

Link to comment
https://www.sau.com.au/forums/topic/301673-mods-and-tuning/#findComment-5007134
Share on other sites

without changing ur turbo rb20 actuator lol :)

whoops i ment with the rb25 turbo if u put on the rb20 turbos actuator u can have 10psi insted of 7.. rb20 turbos stock boost is higher was half asleep when i wrote previously lol

Link to comment
https://www.sau.com.au/forums/topic/301673-mods-and-tuning/#findComment-5007836
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...