Jump to content
SAU Community

Trust Greddy Products: Profec B Spec 2, Power Extreme Ii And Gs Exhausts , Spec Ls Coolers


Recommended Posts

All items can be picked up from Hornsby area, Upper North Shore in Sydney. Items can also be couriered or posted interstate. Please inquire for postage costs.

All items are tax inclusive.

I can also be contacted on 0421 141 538 anytime.

Greddy Profec B Spec II Electronic Boost Controller

Based on the very popular B-Spec., the all new PRofec B-Spec. II's basic function to increase boost is as easy as the original, with an added built in boost pressure display and optional features like real-time, peak or last boost display (in either kPa or PSI). There are optional warning and boost limiter functions that can be programmed to offer much more control. The two presets values can be stored and are executed by a larger capacity inline solenoid valve. This unit does not require extensive programming and is ideal for low to high boost levels for single or twin turbos with actuator or external wastegates.

$390 ----SOLD OUT----

BspecII_200.jpg

Greddy Spec LS Intercooler Kits

The Greddy Spec LS intercooler is the latest development, to replace the Spec M in the cost effective range of Greddy intercoolers. Offering lower weight than the Spec M combined with the lower cost.

Features

* High performance and cost effective

* Lower weight compared to previous Spec M model

* High quality 2 ply silicon hosing

* All parts included for easy vehicle installation

Available for:

Nissan - Silvia/180SX - PS13/RPS13 - H280/L600/W76

Nissan - Silvia - S14/S15 - H280/L600/W76

Nissan - Skyline - ECR33 - H280/L600/W76

$685

ic_spec_ls.jpg

Trust Power Extreme II cat-back exhausts

GReddy Exhaust Systems are some of the finest exhausts available today. All GReddy exhaust systems (SP, PE, MX, EVO, & G2) are complete cat-back units, which do not effect emissions related hardware. Each specific application bolts-on, using factory mounting hangers. Our unique straight-though design allows for the perfect compromise between Power, Torque, and a deep- throaty Sound. Although mufflers can look the same from the outside, our internal construction sets our systems apart. With countless hours of testing the performance and sound, our expert Exhaust Technicians tune each application by varying the size or sequence in the perforated tubing and/or changing the amount of non-corrosive stainless-steel mesh and sound-suppressing composite cube packing material within each muffler can. The quality and workmanship extends through the outer shell of the system. With laser-cut, computerized mandrel bent aluminized tubing, thick flanges, OEM style hangers, and a polished stainless-steel muffler can and tip, GReddy exhaust look as good as they perform. Each system type (SP, PE, MX, EVO, & G2) varies in the outer look as well as flow characteristic for each application.

Only model in stock are for S13/180SX

$835

trustpowerextreme.jpg

Trust Power Extreme GS cat-back exhaust systems

The latest release from Trust.

Available for:

Nissan - Silvia - S14/S15

$990

daishi.jpg

Trust Airinx GT Panel Filters

The Trust Airinx GT panel filter is an advanced genuine panel replacement. With special advanced fiber filter efficiency and dust collection efficiency. High rigidity and durability are created by adopting steel net laminating structure. The rubber frame of the seal efficiency, shuts out the dust. The high performance and high quality offers superior cost per performance. Installation is simple, the genuine filter can simply be exchanged for the Trust Airinx GT panel filter.

The panel filter suits most Nissan models including Skylines, Stageas and Silvias.

$75

airinxGT.jpg

  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 4 weeks later...
  • 1 month later...
  • 2 weeks later...
  • 3 weeks later...

hay buddy

can i get a price for a greddy inlet plenum for an rb26

and can u tell me what throttle body options are available with that

thanks

julz

  • 2 weeks later...


  • Latest Posts

    • How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • Take the fall as a warning sign for future endeavours  Stay safe mate
    • hi mate, HKS cooler piping still available by any chance?
×
×
  • Create New...