Jump to content
SAU Community

Recommended Posts

1, 2x trust/greddy airnix pod filters with adapters,-$40ea

2, 2x rb20/25 80mm air flow meters, excellent condition-$100ea

3, Apexi rx6 s/s turbo kit apexi dump/frontpipe,intake and turbosmart gate excel cond-$2000

4, cusco 1way to suit r180 diffs excellent cond-$350

5, s15 fujitsubo exhaust, jasma, brandnew never fitted, 3"then into 3.5" quality exhaust-$700

6, greddy oil catch can-brand new in box-$80

7, greddy type 'r' bov brandnew condition-highest flowing bov on the market-$250

8, GTR33 drivers and passengers recaro seat rails-sits nice and low,can fit gtst etc- $100ea

9, 2xhks ssq bov-new style ones with fins, practially brand new -$250ea

10, hks intake cam gear for rb26- $80

11, rb26 hks split dumps, off the turbo, direct bolt in,im using same in my car,spare set-$400

12, jun oil cap for rb26-might fit other rb's but i know it doesnt fit sr's-$50

13, motec m4-ive had this for a while now, still new never used-$850

14, PWR preditor kit, for sr20det, intercooler,radiator and thermo, direct bolt in,brand new-$800

15, PWR intercooler brand new never used-core size 500x300x73-$300

16, r33 genuine ganadors-electric,direct bolt in,best fitting mirrors around,needs painting-$300

17, r33 oil catch can with built in washer tank,including speedflow -12 braided lines/fittings-$350

18, s14 carbon fibre air diversion panel, brandnew-$100

19, Sparco steering wheel -practially brand new-$120

20, sr20det forged pistons,shot peened rods,50thou+, used 2000kms,went stroker instead-$300

21, ssr center caps, came off my 19" professors, still got plastic on, prolly fit other sizes-$100

22, sr20det type A tomie valve springs, brand new-$200

23, turbosmart ultragate38,sleeper series brandnew with adapters etc-$400

24, z32 airflow meter,brand new still in box,no plug-$200

25, Greddy dual pillar mount for wrx, classic shape wrx-gc maybe? brand new in box-$120

26, sr20det brian crower cams, very aggressive,for high reving high hp motors,brandnew-$500

thats all for now,

usuall story-most items are practically brand new or new never used and are priced pretty fair so no low balling please,

items located perth, mirrabooka, can post if u like at ur expense, no hold any parts first in best dressed etc etc.

i only uploaded a few pic's -too lazy, more pic's on request

pm or sms easiest-i dont always here phone ring.

cheers collin 0404 124 608

[/i]

post-51436-1262581345_thumb.jpg

post-51436-1262581360_thumb.jpg

post-51436-1262581379_thumb.jpg

post-51436-1262581392_thumb.jpg

post-51436-1262582944_thumb.jpg

post-51436-1262583259_thumb.jpg

post-51436-1262583307_thumb.jpg

post-51436-1262583331_thumb.jpg

post-51436-1262583344_thumb.jpg

post-51436-1262583363_thumb.jpg

post-51436-1262583385_thumb.jpg

Edited by YaskY
Link to comment
https://www.sau.com.au/forums/topic/302438-the-last-of-it-sale/
Share on other sites

Hi there do u have a pic of the afm that u r selling for $100??? What r they, Z32??? Also do u haves of oils catch can that's $80???

Thanks heaps

a return pm would be best :) thanks

sorry cant pm, the afm are not z32's there off a rb20/25 they are a straight swap for gtr afm as they plug straight in and are larger diameter.

post-51436-1262609630_thumb.jpg

post-51436-1262609645_thumb.jpg

UPDATED LIST GUYS 05/01/10

1, 2x trust/greddy airnix pod filters with adapters,-$40ea

2, 2x rb20/25 80mm air flow meters, excellent condition-$100ea

3, Apexi rx6 s/s turbo kit apexi dump/frontpipe,intake and turbosmart gate excel cond-$2000

4, cusco 1way to suit r180 diffs excellent cond-$350

5, s15 fujitsubo exhaust, jasma, brandnew never fitted, 3"then into 3.5" quality exhaust-$700

6, greddy oil catch can-brand new in box-SOLD PENDING

7, greddy type 'r' bov brandnew condition-highest flowing bov on the market-$250

8, GTR33 drivers and passengers recaro seat rails-sits nice and low,can fit gtst etc- $100ea

9, 2xhks ssq bov-new style ones with fins, practially brand new -$250ea

10, hks intake cam gear for rb26- SOLD PENDING

11, rb26 hks split dumps, off the turbo, direct bolt in,im using same in my car,spare set-$400

12, jun oil cap for rb26-might fit other rb's but i know it doesnt fit sr's-SOLD PENDING

13, motec m4-ive had this for a while now, still new never used-$850

14, PWR preditor kit, for sr20det, intercooler,radiator and thermo, direct bolt in,brand new-$800

15, PWR intercooler brand new never used-core size 500x300x73-$300

16, r33 genuine ganadors-electric,direct bolt in,best fitting mirrors around,needs painting-$300

17, r33 oil catch can with built in washer tank,including speedflow -12 braided lines/fittings-$350

18, s14 carbon fibre air diversion panel, brandnew-SOLD

19, Sparco steering wheel -practially brand new-SOLD

20, sr20det forged pistons,shot peened rods,50thou+, used 2000kms,went stroker instead-$300

21, ssr center caps, came off my 19" professors, still got plastic on, prolly fit other sizes-SOLD

22, sr20det type A tomie valve springs, brand new-SOLD PENDING

23, turbosmart ultragate38,sleeper series brandnew with adapters etc-$400

24, z32 airflow meter,brand new still in box,no plug-SOLD PENDING

25, Greddy dual pillar mount for wrx, classic shape wrx-gc maybe? brand new in box-$120

26, sr20det brian crower cams,very aggressive,for high reving high hp motors,brandnew-SOLD PENDING

thats all for now,

usuall story-most items are practically brand new or new never used and are priced pretty fair so no low balling please,

items located perth, mirrabooka, can post if u like at ur expense, no hold any parts first in best dressed etc etc.

i only uploaded a few pic's -too lazy, more pic's on request

pm or sms easiest-i dont always here phone ring.

cheers collin 0404 124 608

[/i]

UPDATED 06/01/10

1, 2x trust/greddy airnix pod filters with adapters,-$40ea

2, 2x rb20/25 80mm air flow meters, excellent condition-$100ea

3, Apexi rx6 s/s turbo kit apexi dump/frontpipe,intake and turbosmart gate excel cond-$2000

4, cusco 1way to suit r180 diffs excellent cond-$350

5, s15 fujitsubo exhaust, jasma, brandnew never fitted, 3"then into 3.5" quality exhaust-$700

6, greddy oil catch can-brand new in box-SOLD

7, greddy type 'r' bov brandnew condition-highest flowing bov on the market-$250

8, GTR33 drivers and passengers recaro seat rails-sits nice and low,can fit gtst etc- $100ea

9, 2xhks ssq bov-new style ones with fins, practially brand new -$250ea

10, hks intake cam gear for rb26- SOLD

11, rb26 hks split dumps, off the turbo, direct bolt in,im using same in my car,spare set-$400

12, jun oil cap for rb26-might fit other rb's but i know it doesnt fit sr's-SOLD

13, motec m4-ive had this for a while now, still new never used-$850

14, PWR preditor kit, for sr20det, intercooler,radiator and thermo, direct bolt in,brand new-$800

15, PWR intercooler brand new never used-core size 500x300x73-$300

16, r33 genuine ganadors-electric,direct bolt in,best fitting mirrors around,needs painting-$300

17, r33 oil catch can with built in washer tank,including speedflow -12 braided lines/fittings-$350

18, s14 carbon fibre air diversion panel, brandnew-SOLD

19, Sparco steering wheel -practially brand new-SOLD

20, sr20det forged pistons,shot peened rods,50thou+, used 2000kms,went stroker instead-$300

21, ssr center caps, came off my 19" professors, still got plastic on, prolly fit other sizes-SOLD

22, sr20det type A tomie valve springs, brand new-SOLD

23, turbosmart ultragate38,sleeper series brandnew with adapters etc-SOLD

24, z32 airflow meter,brand new still in box,no plug-SOLD

25, Greddy dual pillar mount for wrx, classic shape wrx-gc maybe? brand new in box-$120

26, sr20det brian crower cams, very aggressive,for high reving high hp motors,brandnew-SOLD

thats all for now,

usuall story-most items are practically brand new or new never used and are priced pretty fair so no low balling please,

items located perth, mirrabooka, can post if u like at ur expense, no hold any parts first in best dressed etc etc.

i only uploaded a few pic's -too lazy, more pic's on request

pm or sms easiest-i dont always here phone ring.

cheers collin 0404 124 608

[/i]

UPDATED LIST 07/01/10

1, 2x trust/greddy airnix pod filters with adapters,-$40ea

2, 2x rb20/25 80mm air flow meters, excellent condition-$100ea

3, Apexi rx6 s/s turbo kit apexi dump/frontpipe,intake and turbosmart gate excel cond-$2000

4, cusco 1way to suit r180 diffs excellent cond-$350

5, s15 fujitsubo exhaust, jasma, brandnew never fitted, 3"then into 3.5" quality exhaust-$700

6, greddy oil catch can-brand new in box-SOLD

7, greddy type 'r' bov brandnew condition-highest flowing bov on the market-SOLD

8, GTR33 drivers and passengers recaro seat rails-sits nice and low,can fit gtst etc- $100ea

9, 2xhks ssq bov-new style ones with fins, practially brand new -$250ea

10, hks intake cam gear for rb26- SOLD

11, rb26 hks split dumps, off the turbo, direct bolt in,im using same in my car,spare set-$400

12, jun oil cap for rb26-might fit other rb's but i know it doesnt fit sr's-SOLD

13, motec m4-ive had this for a while now, still new never used-$850

14, PWR preditor kit, for sr20det, intercooler,radiator and thermo, direct bolt in,brand new-$800

15, PWR intercooler brand new never used-core size 500x300x73-$300

16, r33 genuine ganadors-electric,direct bolt in,best fitting mirrors around,needs painting-$300

17, r33 oil catch can with built in washer tank,including speedflow -12 braided lines/fittings-SOLD

18, s14 carbon fibre air diversion panel, brandnew-SOLD

19, Sparco steering wheel -practially brand new-SOLD

20, sr20det forged pistons,shot peened rods,50thou+, used 2000kms,went stroker instead-$300

21, ssr center caps, came off my 19" professors, still got plastic on, prolly fit other sizes-SOLD

22, sr20det type A tomie valve springs, brand new-SOLD

23, turbosmart ultragate38,sleeper series brandnew with adapters etc-SOLD

24, z32 airflow meter,brand new still in box,no plug-SOLD

25, Greddy dual pillar mount for wrx, classic shape wrx-gc maybe? brand new in box-$120

26, sr20det brian crower cams, very aggressive,for high reving high hp motors,brandnew-SOLD

thats all for now,

usuall story-most items are practically brand new or new never used and are priced pretty fair so no low balling please,

items located perth, mirrabooka, can post if u like at ur expense, no hold any parts first in best dressed etc etc.

i only uploaded a few pic's -too lazy, more pic's on request

pm or sms easiest-i dont always here phone ring.

cheers collin 0404 124 608

[/i]

  • 2 weeks later...

UPDATED 18/01/10

1, 2x trust/greddy airnix pod filters with adapters,-$40ea

2, rb20/25 80mm air flow meter, excellent condition-$100ea

3, Apexi rx6 s/s turbo kit apexi dump/frontpipe,intake and turbosmart gate excel cond-$1900

4, cusco 1way to suit r180 diffs excellent cond-$300

5, s15 fujitsubo exhaust, jasma, brandnew never fitted, 3"then into 3.5" quality exhaust-SOLD

6, greddy oil catch can-brand new in box-SOLD

7, greddy type 'r' bov brandnew condition-highest flowing bov on the market-SOLD

8, GTR33 drivers and passengers recaro seat rails-sits nice and low,can fit gtst etc- SOLD

9, 2xhks ssq bov-new style ones with fins, practially brand new -$200ea

10, hks intake cam gear for rb26- SOLD

11, rb26 hks split dumps, off the turbo, direct bolt in,im using same in my car,spare set-$400

12, jun oil cap for rb26-might fit other rb's but i know it doesnt fit sr's-SOLD

13, motec m4-ive had this for a while now, still new never used-$850

14, PWR preditor kit, for sr20det, intercooler,radiator and thermo, direct bolt in,brand new-SOLD

15, PWR intercooler brand new never used-core size 500x300x73-$300

16, r33 genuine ganadors-electric,direct bolt in,best fitting mirrors around,needs painting-SOLD

17, r33 oil catch can with built in washer tank,including speedflow -12 braided lines/fittings-SOLD

18, s14 carbon fibre air diversion panel, brandnew-SOLD

19, Sparco steering wheel -practially brand new-SOLD

20, sr20det forged pistons,shot peened rods,50thou+, used 2000kms,went stroker instead-$300

21, ssr center caps, came off my 19" professors, still got plastic on, prolly fit other sizes-SOLD

22, sr20det type A tomie valve springs, brand new-SOLD

23, turbosmart ultragate38,sleeper series brandnew with adapters etc-SOLD

24, z32 airflow meter,brand new still in box,no plug-SOLD

25, Greddy dual pillar mount for wrx, classic shape wrx-gc maybe? brand new in box-$120

26, sr20det brian crower cams, very aggressive,for high reving high hp motors,brandnew-SOLD

thats all for now,

usuall story-most items are practically brand new or new never used and are priced pretty fair so no low balling please,

items located perth, mirrabooka, can post if u like at ur expense, no hold any parts first in best dressed etc etc.

i only uploaded a few pic's -too lazy, more pic's on request

pm or sms easiest-i dont always here phone ring.

cheers collin 0404 124 608

[/i]

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...