Jump to content
SAU Community

Recommended Posts

Ok so firstly, the problem. Soon as I start the car, it idles fairly smoothly as per normal however you can feel these low-pitched subtle pops/thumps coming out of the exhaust which you can feel while sitting in the car. As I start driving it, the car starts jumping and that low-pitch popping sound becomes consistent with the revs and basically the car barely goes anywhere. I first had it looked at through a workshop and he said it was probably burnt out spark plugs, turns out yes my spark plugs were burnt out so brand new ones were put in.

I picked up the car and the car drove perfect! That was until boost comes in, as soon as boost came in, the same thing happened again (as above). Then for a short period of time on the way home, it was all clear and the car drove perfectly both on and off boost and was as it use to be. But then the problem came back where the missfire and popping/thumping would happen just above 1500rpm. I barely made it home.

Does ANYONE know what the problem is/what's causing it?

Not sure if it's relevant or not, however last week the car overheated due to the plastic spout on top of the stock radiator breaking. I had a new Koyo Aluminium Radiator installed and when I picked it up from that workshop that installed the radiator, that's when this problem occured. However they stated they touched nothing but take out the old radiator and drop in the new one.

If your plugs were that old, and it depends how many km's your OEM coil packs have done, I would suggest if you can afford it to replace all 6 x Coil Packs to compliment your new plugs with after market ones (Splitfire, Superspark etc) to save yourself any headaches in the long run. Superspark's are an excellent choice for the price range.

Ok so firstly, the problem. Soon as I start the car, it idles fairly smoothly as per normal however you can feel these low-pitched subtle pops/thumps coming out of the exhaust which you can feel while sitting in the car. As I start driving it, the car starts jumping and that low-pitch popping sound becomes consistent with the revs and basically the car barely goes anywhere. I first had it looked at through a workshop and he said it was probably burnt out spark plugs, turns out yes my spark plugs were burnt out so brand new ones were put in.

I picked up the car and the car drove perfect! That was until boost comes in, as soon as boost came in, the same thing happened again (as above). Then for a short period of time on the way home, it was all clear and the car drove perfectly both on and off boost and was as it use to be. But then the problem came back where the missfire and popping/thumping would happen just above 1500rpm. I barely made it home.

Does ANYONE know what the problem is/what's causing it?

Not sure if it's relevant or not, however last week the car overheated due to the plastic spout on top of the stock radiator breaking. I had a new Koyo Aluminium Radiator installed and when I picked it up from that workshop that installed the radiator, that's when this problem occured. However they stated they touched nothing but take out the old radiator and drop in the new one.

Hay i had a very similar problem with my R34 after checking all the above mentioned problems new plugs new coils. i pulled the cas spun the shaft and there it was noisey bearings. pulled it apart marked it carefully pressed on new bearings put it back in bang full power again. no problems even put my old coils back in perfect.

It is actually the fastest check out of all the possible problems and $15 to fix.

I maybe over doing it here but. You say it overheated? by how much and for how long? these things have alloy heads, i.e. to hot for to long and your head starts to warp (Very bad) Has it used any coolant at all?

might be something to look into

Found out it was the wiring loom/harness for the coilpacks. 2 of the plug clips were cracked so they were basically half in half out sometimes.

In regards to the head being warped...is this something that could be potential in the near future? What's the easiest way to tell?

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...