Jump to content
SAU Community

Recommended Posts

  • Replies 124
  • Created
  • Last Reply

Top Posters In This Topic

The throttle body cable I'm having problems with. Any tips, also I bought one of these plenums with 80mm throttle body if that changes anything.

Would like to note though that the throttle body has issues and won't close fully when throttle released, it stays open at about 30%. And a professional performance shop installed it to...

The throttle body cable I'm having problems with. Any tips, also I bought one of these plenums with 80mm throttle body if that changes anything.

Would like to note though that the throttle body has issues and won't close fully when throttle released, it stays open at about 30%. And a professional performance shop installed it to...

Hi,

The throttle cable should have enough slack - have you tried not using the bracket included with the adaptor?

In regards to the TB, is it not closing fully because the cable restricts it or does it get stuck? Also, do you have the 80mm TB with our logo etched on it or is the earlier version?

  • 1 month later...
  • 2 weeks later...

Hey Brendan,

You mentioned that you also have a plain cast alloy version (not polished or electroplated) which would suit me nicely .. how much cheaper are these?

Thanks,

Hey Brendan,

You mentioned that you also have a plain cast alloy version (not polished or electroplated) which would suit me nicely .. how much cheaper are these?

Thanks,

PM SENT

  • 1 month later...

Hey brendan, do you know if these manifolds will fit a R32 RB25DE head? using this head with a RB30 bottom end with a phat turbo hanging off the side and how much is the complete kit (plus postage)with adaptor for standard TB (NOT polished) to 6056 please?

Hey brendan, do you know if these manifolds will fit a R32 RB25DE head? using this head with a RB30 bottom end with a phat turbo hanging off the side and how much is the complete kit (plus postage)with adaptor for standard TB (NOT polished) to 6056 please?

Hi,

These won't suit the RB20DE - sorry.

An entire kit to suit the R333 RB25DET in plain cast finish is $495 incl. delivery. This comes with the TB adaptor as well.

- Brendan

Hi,

These won't suit the RB20DE - sorry.

An entire kit to suit the R333 RB25DET in plain cast finish is $495 incl. delivery. This comes with the TB adaptor as well.

- Brendan

Brendan please re read my question above^^^ , will your Manifold fit a R32 RB25DE (head only, to go on a RB30 bottom end)? i know it wont fit a RB20DE, smaller ports etc to a 25DET

regards Steve

Brendan please re read my question above^^^ , will your Manifold fit a R32 RB25DE (head only, to go on a RB30 bottom end)? i know it wont fit a RB20DE, smaller ports etc to a 25DET

regards Steve

Sorry misread that question.

Same story with the RB25DE different bolt pattern from what I have been told to the Turbo version so it would not fit.

- Brendan

Sorry misread that question.

Same story with the RB25DE different bolt pattern from what I have been told to the Turbo version so it would not fit.

- Brendan

Have checked with my mate at nissan and he has sent me some pics of both 32 and 33 manifolds, the gasket on both have the same part # but as i have both motor types at home i will check/swap and see if there is any fitting issues and take it from there

Have checked with my mate at nissan and he has sent me some pics of both 32 and 33 manifolds, the gasket on both have the same part # but as i have both motor types at home i will check/swap and see if there is any fitting issues and take it from there

Hi,

If you can do that it would be great, as you are the second person that has told me that the gasket part numbers are the same for both so technically it should fit.

Please let me and everyone else know.

- Brendan

  • 4 weeks later...

Have checked with my mate at nissan and he has sent me some pics of both 32 and 33 manifolds, the gasket on both have the same part # but as i have both motor types at home i will check/swap and see if there is any fitting issues and take it from there

ive checked this with the engines i have at home, the RB25DE has far more common parts with the RB20DET than the RB25DET, ie top feed injectors, same stud pattern on the intake (albeit with slightly bigger ports on the DE) the RB25DET intake will NOT fit the RB25DE head . . .different bolt pattern- different size/shaped ports, only the water jackets line up! (can supply photos if you wish)Brendan- does your aftermarket manifold come with provisions for bolting up the idle air controls , brake booster vacuum port etc?

hi there, could you send me a pic of the plain cast aluminium plenum please, semi interested thumbsup.gif

Image sent cool.gif

The cast finish ones are proving to be very popular - plenty of bling bling chrome ones still in stock!

  • 5 weeks later...

Hey mate just curious do you do these for the RB20DET aswell, got a motor coming for a track car would love a front facing manifold. Also does the wiring loom alow for the relocation of the throttle bodie? ie. TPS wiring length ect. Cheers. Nice looking manifolds btw ;)

Hey buddy,

You are about 1.5 months too early mate :D

We will be getting delivery of the same style plenum - front facing for the RB20DET in about 1.5-2 months time.

These plenums are a direct fit and will work with the original throttle body, not sure about loom will need to wait for it to come in.

- Brendan

Cheers mate well i shall have the engine in about a month so will be great timing :P Roughly the same price im guessing. Shall add some bling and performance to the track car :) not to mention simplifying plug changes :)




  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...