Jump to content
SAU Community

Recommended Posts

Hi all just clearing up my shed and found an intercooler kit i had on my old car.

Kit was on car for a couple of years and been in the shed for around 5 years in storage.

It is for R33 GTS-t model. Trust/Greddy brand full bolton kit. What you see in the photos is what it is.

Kit was installed with oil catch tank so internal is very clean especially the outtake side no trace of oil whatsoever.

Kit also has a bolton Apexi twin chamber BOV, sounds very different to other BOVs on the market, very nice.

Overall condition is excellent see photos. I have not clean or polish so may look a bit dirty (but you can clean it yourself : ) )

No pucture no dents even at the bottom. fins have the usual marks but can be bent back easily (you can do that too : ) )

whats the going rate guys????? make me an offer?? i ve been out of the scene too long. i know i paid $1800 new for the cooler and $600 new for BOV.

post-1195-1263902675_thumb.jpg

post-1195-1263902700_thumb.jpg

post-1195-1263902727_thumb.jpg

post-1195-1263902751_thumb.jpg

post-1195-1263902788_thumb.jpg

$600 for the whole kit what you see in the pic.

I can always be offered more if you like..... : )

need it gone, wife is nagging cos its in the way.

cant believe not more people jumps at this, not like 10 yrs ago i guess????

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
    • No, you're wrong, and you've always been wrong about this. The Nismo has 2 sets of openings. One is a real 2-way, and the other is a 1-way. There is no 1.5-way possible with the ramps that they offer. A real 1.5-way does exist. That Cusco stuff I posted is a prime example. If the forward drive ramps are, say 55°, and the overrun ramps are, say, 30°, then you will get about half as much LSD effect on overrun than you do on drive. It is real, it realy works. OK, you're slightly right. The Nismo has 55° and 45° ramps on the 2-way, so it does offer less LSD effect on overrun. But, I think that just means that they've (probably) sensibly established that you do not want actually equal LSD effect on overrun. You just want "quite a lot, but not quite as much as the drive LSD effect".
    • Just wanted to unearth this and post my baby with the new front ❤️😝 Took her to my wedding rehearsal today. Next up is getting wide skirts (after wedding)
×
×
  • Create New...