Jump to content
SAU Community

Recommended Posts

Hey i have a R33 Rb25det that when driving threw gears its just not reving out,

it may have been a non turbo converted to a turbo in the past?

its just going up to about 5,500rpm till she seems like it dont wanna go further, sounds like its detting?

stock ecu.?

mods are front mount, custom plenum, pod filter.

What do you mean, when it gets to 5500rpm it doesn't want to go no furthur? It physically stops revving at that rpm or it continues to rev but slower?

Also you say it sounds like its "detting", im assuming you mean detonation however it won't be detonation, few people actually know what detonation sounds like and if you can audibly hear it than it is too late. However with your modifcations on a stock ECU it will be running rich so the chances of it detonating are slim.

I'm going to assume that you are hearing the engine missfire after 5500rpm which is causing it to not want to rev past 5500rpm and causing it to lose all power and drive like crap. What spark plugs are in the car and when did you last change them? You seem to have a common skyline missfire issue. Start searching for "missfire" "coilpacks" "spark plugs" and you will see how common it is.

Edited by PM-R33

Yep that is missfire. It means the spark can not ingnite the mixture in the cylinder due to a poor spark, usually caused by fouled plugs, too big of a gap or a weak ignition system. Change the plugs and see if it fixes it. Most likely it will, if not than you will most likely have to start looking at coil packs.

What spark plugs are you putting into it?

Edited by PM-R33

Also add to the fact the ole - factory ECU.

You've changed the intake properties of the motor via plenum and FMIC.

I dare say increased boost as well.

Couple that with old plugs as you've said... come's as little surprise its running like a bag of shit.

You'll also probably find once you change the plugs - it'll do the same thing again in 1,000km's due to the plugs getting fouled up again.

Moral to the story? Go get a tune!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...