Jump to content
SAU Community

Recommended Posts

Hey guys, only just recently i have had trouble with my engine misfiring bad. Its an R33 26 with big single in an R32 GTS-T, WOLF 3d, near brand new plugs gapped to .7, stock coils. It has never happened before until it was about 30deg the other night and usually after about 15mins of normal driving it starts.

I was driving along at about 4000 rpm in second and it started sounding like your typical boxer engine, and assumed an injector plug had come off as it's done it to me before. Checked all plugs and the problem stopped . . . maybe not. Started the car up, sounded good, drove along and it came back then disappeared, came back, disappeared etc. it even happens on idle sometimes (it's an extremely rapid misfire sounding like a machine gun haha)

Doesn't matter what gear or what rpm but gets really bad when you load the engine up or stay on constant throttle, and if you hit boost it will go away sometimes. The stock oil pressure gauge in the dash will get close to zero then jump to about 4, then just fall and rise as it pleases. Engine doesn't blow smoke and no oil in turbo inlet or exhaust.

I have checked all plugs and had to change number one as it looked fried (less than 2000km old).The rest still look new

Cut out each injector while car was running to see if there was no change on one. all good though

Changed fuel filter over in case it was blocked

I'm guessing i should just seal my coils with silicone and do a comp test but while i'm there should i be looking at anything else.

Any help appreciated

Edited by AE86 Spoontah

No i havent and there is no AFM. . .

but i have a theory after drivng home today. Another hot day and after 10 mins it started happening. Checked all injector plugs again an no change to engine noise to it's got to be the coil packs. Reason i'm thinking this is that there are hairline cracks in the coils and when under bonnet temps get too hot, the cracks expand and the spark jumps out. I'm sealing them up now so i'll see if that fixes the problem.

double check that coil plugs "click" when you attach it as it's happened before where loose connection causes intermittent misfiring

They all click apart from no.1 but you can't pull no.1 plug off unless you release it how you normally would

Edited by AE86 Spoontah

Sealed up coils with some quick cure high temp sealant but hasn't fixed the problem. It's gotta be electrical is it "pops" alot more now and the pops are louder like there is bulk fuel being ignited.

Could there be a problem with my ignitor?

Sealed up coils with some quick cure high temp sealant but hasn't fixed the problem. It's gotta be electrical is it "pops" alot more now and the pops are louder like there is bulk fuel being ignited.

Could there be a problem with my ignitor?

Hi there, dunno what your problem is but seems like there are two which could be related. If you have sealed up your cracked coilpacks & the sealant has had sufficient time to completely cure without fixing problem or as you say making it worse I would be borrowing some known good coilpacks to substitute & check. Also I'm told that the factory Nissan oil pressure senders/gauges on Skylines are notoriously dodgy but you could also have bad electrical earthing causing your combined problem.

My 2c

Cheers GW

Hi there, dunno what your problem is but seems like there are two which could be related. If you have sealed up your cracked coilpacks & the sealant has had sufficient time to completely cure without fixing problem or as you say making it worse I would be borrowing some known good coilpacks to substitute & check. Also I'm told that the factory Nissan oil pressure senders/gauges on Skylines are notoriously dodgy but you could also have bad electrical earthing causing your combined problem.

My 2c

Cheers GW

I might have to borrow my mates Splitfires and see if that helps. I heard to that the factory gauges shit at the best of times

too.

Put mates Splitfire's in and worked for about 10mins and the problem came back again so it's not the coils. Put my standard coils back in, sprayed coil pack module with contact cleaner and kept the vally cover off this time and the problem didn't come back after 10 mins, so i gave it a boot and it did it abit on boost. Maybe the coil pack module is getting too hot? Any one got a CPM i can borrow in Perth to test for 5 mins? Cheers

Edited by AE86 Spoontah

Found that the problem was the ignitor was getting too much heat soak in the hot weather so i relocated it next to the brake booster and have no problems with misfiring even on a 40 degree day. Crisis averted haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...