Jump to content
SAU Community

R34 Gt - R34 Gtr Complete Conversion Help Needed

A-B_DR/fT-KinG!!

By A-B_DR/fT-KinG!!,
in Western Australia

 Share

Recommended Posts

A-B_DR/fT-KinG!! Enthusiast

A-B_DR/fT-KinG!!

Posted
Posted

Hey Guys,

Before i start away, i want to mention, i used the search function and couldn't find all the help i needed.

ok, so i got an R34 GT, and am going to do a complete 34 GTR conversion to it which includes the following, Engine, Gearbox, Drivetrain, 4wd system, Brembos, Suspension, Interior and the whole lot. Now i was going to say, it is going to be daily, so i would like it to be liscenced with the swap over, anyone know if much work will be needed done? i read on engine swaps there is some form, but im assuming for this there should be more than that. if anyone knows any info would be awesomeness. oh and just so u know, i have all the parts already as i just bought a 34 GTR wreck.

cheers for any input guys

wudi Enthusiast

wudi

Posted
Posted (edited)

Hey

You will need to jump onto the DPI website and get a copy of their Vehicle Modification Application. Check The DPI Website here. and follow the links.

You'd submit that to DPI and wait for a response. Because your swapping engine, drive-train, suspension and brakes over I would hazard a guess that they would require you have the car engineer approved by one of their recommended independent engineers before taking the car over the pits for an inspection.

I am not sure if this will prove to be a feasible exercise. It would probably be more cost effective to sell the wreck and sell your car to buy yourself a GTR. Your insurance may also have a hard time covering the car (unless you go with someone dodgy like Just Cars)...

If your not swapping panels as well then a GTR in GTT's clothing would be quite the sleeper!

Edited by [ANGRY13]
Traitor7 Enthusiast

Traitor7

Posted
Posted

Sounds like a good project but also sounds like bulk coin is going to be spent.

+1 on selling the wreck and buying a GTR instead, in the end I doubt you'll save much money and GTR's can be had for very decent prices these days.

R32 Driver Mentor

R32 Driver

Posted
Posted

Seeing as his already bought a 34 GTR wreck it can be done

As ANGRY said fill out the DPI modification application form and go from there

Then you will need an engineer to sign off the mods and take it through pits

Nic_A31 Grand Master

Nic_A31

Posted
Posted

"alot of work" ??...most if not all of it will bolt straight in. Guys...this HAS been done before.... R34 GT-T < R34 GTR running gear.

All the non GTR models have pre drilled holes and template lines where all the GTR gear goes.

It will take alot of time yeah, but there is no difficulty to it...if there is, you probably shouldn't be behind a 26DETT powered car anyway.

Passing the mods will be easy as well, since you're just upgrading to a higher model.

You only need to do the exact same work/permits as somebody upgrading a V6 commie to a V8.

Since you're operating on a different sub-chassis you will need some engineering, but again, that'll be easy to pass

And I dunno what all this "real GTR" business is about. No matter where in Perth, I'd sleep easier at night if it had a GT-T badge on it...GTRs do pull alot of attention...not something you always want.

Dsturbd Grand Master

Dsturbd

Posted
Posted
...this HAS been done before.... R34 GT-T < R34 GTR running gear.

All the non GTR models have pre drilled holes and template lines where all the GTR gear goes.

Who has done this convo into a GT-T ?? like to see how they modified chassis rails

heller44 Mentor

heller44

Posted
Posted (edited)

Pfft, I'd like to see how they fit the transfer case under the gtt floorpan.. Only so much shifting you can do with a big hammer..

^ as well as the chassis rails.. obviously. :)

Edited by heller44
Dsturbd Grand Master

Dsturbd

Posted
Posted
"alot of work" ??...most if not all of it will bolt straight in. Guys...this HAS been done before.... R34 GT-T < R34 GTR running gear.

All the non GTR models have pre drilled holes and template lines where all the GTR gear goes.

It will take alot of time yeah, but there is no difficulty to it...if there is, you probably shouldn't be behind a 26DETT powered car anyway..

The internet is a big place..dwell around here if you like boys, or hit up Google.

Sorry after reading your first post it sounded like you done the conversion yourself ...

Dorigecko Proficient

Dorigecko

Posted
Posted
Hey Guys,

Before i start away, i want to mention, i used the search function and couldn't find all the help i needed.

ok, so i got an R34 GT, and am going to do a complete 34 GTR conversion to it which includes the following, Engine, Gearbox, Drivetrain, 4wd system, Brembos, Suspension, Interior and the whole lot. Now i was going to say, it is going to be daily, so i would like it to be liscenced with the swap over, anyone know if much work will be needed done? i read on engine swaps there is some form, but im assuming for this there should be more than that. if anyone knows any info would be awesomeness. oh and just so u know, i have all the parts already as i just bought a 34 GTR wreck.

cheers for any input guys

Hit up south west brakes.

They've done it before by the sounds.

Dsturbd Grand Master

Dsturbd

Posted
Posted (edited)
Hit up south west brakes.

They've done it before by the sounds.

Can be done if its currently 4wd version .. seen that done but not convo into 2wd with full running gear due to floors n chassis rails being different

Edited by Dsturbd
A-B_DR/fT-KinG!! Enthusiast

A-B_DR/fT-KinG!!

Posted
  • Author
Posted

Cheers for all that guys, really want to do this conversion as all the work will be done by me and my boss (im a mechanic btw). now with the transmission, dont worry about the amount of work, but is it possible to get it to fit in there, or simply impossible.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      Biggest thing is you're okay!   It sounds like between the accident, and the drive home, it was a pretty torturous trip again! On the bright side, you took the opportunity to enjoy the event more from the perspective of a spectator, than as an entrant!   Sad to see so much damage to the car. It really has taken a HUGE hit in the front end. If/when you choose to repair, hopefully the rails are straight (At least from shock tower backwards). Hopefully the extra cage coming through there has save most of the chassis rails, and HOPEFULLY saved the motor too. Best of luck when you eventually get motivated to start pulling it down to check it all out
    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • bcozican
      R32 Gtst - Track Car

      By bcozican · Posted

      Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
×
×
  • Create New...