Jump to content
SAU Community

Recommended Posts

Hey was just wondering what people think of this package?

http://www.tweakit.net/shop/product_info.p...roducts_id=5090

I'll be running about 280rwkw on my rb25det

I broke my fpr when i was getting my half cut :D

So yeah decided to just grab an aftermarket one and this one popped up, any opinions?

Link to comment
https://www.sau.com.au/forums/topic/305522-fuel-system-for-my-25det/
Share on other sites

Just buy Nismo 555cc injectors, use the stock FPR.

1. Factory rail, fine

2. Factory fuel reg, fine

You only need injectors, which are around $750 delivered.

There is no need to go aftermarket anything other than the injectors, so leave it that way and buy a replacement OEM FPR.

Trade Nissan should be about the same, if not cheaper.

If i can get an entire RB26 loom for under $700, there is no way a FPR is going to cost anymore than $100-$150.

You'd be up for around $100 to get a Nismo item here so i don't see a difference enough to get excited about

cant remember exactly but nissan wanted well over 200 for a reg. it was cheaper to get a tomei with the rail adaptop and hoses etc. only reason i wanted a new one is because i busted 3 2nd hand ones in less than 5000km's, each time i didnt know they were broken until it was under full load and leaning out to around 15:1. so i got sick of 15yo shit

I agree changing stuff that doesnt need to be changed is a waste of time, effort and money. I say also stick with stock rail and a stock reg. but I'd go the 740's. HEAPS of head room for basically the same money.

just my 2c!

cheers

+1 for nismo 740s, i have heard from a reliable source they are better to tune than most.

also +1 for stock rail and stock FPR, get trade from nissan it shouldnt be too much. buying an aftermarket has zero advantage other than more useless bling bits you need to worry about at this level.

if your going to run twin external pumps or some BS then by all means go for gold on an aftermarket

If you don't need bigger - don't get them.

Only get 740's if you plan for over ~330rwkw later on.

Otherwise the 555's will do the job just as good.

you can never have enough headroom, that is until they become harder to tune.. then its useless.

in this case i have heard that the red nismo 740s are better to tune than the 555s. that being the SR RB specific red nismo items, not 740s in general.

yet yes, 555s will be enough ;) but for the same price i know i wouldnt think twice.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...