Jump to content
SAU Community

Recommended Posts

Hey Guys

Has anyone on here bought a just jap split dump pipe that acts like a screamer pipe with an internally gated turbo?

http://justjap.com/store/product.php?produ...=276&page=2

The Turbo Im running is a kkr430

Specs:

Compressor side

Inlet pipe 70mm, outlet pipe 50mm 48 trim compressor; inducer 53mm, exducer 76.5mm

Exhaust side

0.58 A/R turbine housing, Turbine wheel outlet 48mm, outer diameter 64.5mm

I realise that it wont give the same roar as a large externally gated turbo but im looking for info/opinions from people who have done this, or people who know how this type of setup sounds .

Cheers

Brad

Link to comment
https://www.sau.com.au/forums/topic/305771-just-jap-split-dump-pipe/
Share on other sites

Cheers Guys

skline01999

Think your right, needed a new dump for the kkr turbo so that would explain the difference..

Elite Racing

Thanks for your opinion.

Are you sure its no hp gain? Less Restriction in the exhaust once the gate opens..

Cheers Guys

skline01999

Think your right, needed a new dump for the kkr turbo so that would explain the difference..

Elite Racing

Thanks for your opinion.

Are you sure its no hp gain? Less Restriction in the exhaust once the gate opens..

This question gets asked a lot, internal wastegates don't sound good with screamers because they never seal properly and are always leaking. Leaving you with a car that sounds like its doing a wet fart all the time.

Ugh screamer pipe is so gay -

or
or
- do you really want that sound every time you boost around? Get's f**king annoying after a while, trust me - though I don't know if an internal gate like that will be that loud. I wanna get my external gate screamer pipe plumbed into the exhaust ASAP, it sounds similar to that video if not louder and it f**ks me off.

I can't believe people in the youtube comments say it sounds awesome.

I also lol at how many RB20 and RB25's on youtube get revved past 8k rpm constantly.

This question gets asked a lot, internal wastegates don't sound good with screamers because they never seal properly and are always leaking. Leaving you with a car that sounds like its doing a wet fart all the time.

I've Heard of people using a plate to seal it and stop the exhaust leak.

Has anyone on here actually done it?

v8tzr

How would back pressure be affected? Its only the gases that aren't needed to spin the turbine.

Ugh screamer pipe is so gay -
or
do you really want that sound every time you boost around? Get's f**king annoying after a while, trust me - though I don't know if an internal gate like that will be that loud. I wanna get my external gate screamer pipe plumbed into the exhaust ASAP, it sounds similar to that video if not louder and it f**ks me off.

Apparently they are not too loud internally gated.

I know how a screamer pipe sounds.. mate has one on his rb20 180sx.. sounds tough.

Cheers Guys

skline01999

Think your right, needed a new dump for the kkr turbo so that would explain the difference..

Elite Racing

Thanks for your opinion.

Are you sure its no hp gain? Less Restriction in the exhaust once the gate opens..

Absolutely no gain to be had.

If you were running a 1 inch exhaust, yes.....with a 3 inch, no.

Apparently they are not too loud internally gated.

I know how a screamer pipe sounds.. mate has one on his rb20 180sx.. sounds tough.

GAY!

perhaps the only screamer you are looking for is when the local constabulalry insert their wee-wee into your poo-poo.

Maybe that will remind you why its a stupid fu*kin idea

My mate has one on his vl turbo with an rb25det in it...that exact one, it was a leaking piece of crap...sounded the part...but boy did it leak...we put stock dump back on and it cracked along...was a suprise how much of a difference it made. I had one though on my sr20..and it never leaked, but a friend has one that does leak, the overall quality of the item is crap to be honest, but if you get lucky with one that doesn't leak, should be ok...

Its the splitter in the middle that determines the level of seal from the main to the actuator side.

If you contour the splitter well enough to suit the turbo it wont leak much.

They can still sound pretty good, depends on pipe length / size / etc.

I say go for it and if you dont like it take it off. Pretty simple.

i've got a jjr screamer on my highflow turbo, Look i'l be honest with you guys, Just like what others said......

- No HP advantage

- illegal

- LEAKS ON IDLE. JJR ONES LEAK 100% , IF U WANT A GOOD ONE U CAN GET AN EXSPENSIVE ONE FOR LIKE 300 & THEY DONT LEAK.

but but, I love it, sounds crazy!!!!!!!! in the videos thats what mines sounds like! even sounds better with the cat bashed out, more holow... but yeh, i'd personally dont recommend it.

Ugh screamer pipe is so gay -
or
or
- do you really want that sound every time you boost around? Get's f**king annoying after a while, trust me - though I don't know if an internal gate like that will be that loud. I wanna get my external gate screamer pipe plumbed into the exhaust ASAP, it sounds similar to that video if not louder and it f**ks me off.

I can't believe people in the youtube comments say it sounds awesome.

I also lol at how many RB20 and RB25's on youtube get revved past 8k rpm constantly.

The first one is external, the other two i'm not so sure they are fully external. 2nd one if it's only running 10psi really isn't moving much air so that does affect things.

You can tell the difference between a fully dedicated external gate screamer because the exhaust gas does not go through the turbo like it does on int gated 'screamers', just makes them sound poxy IMO.

List here on my vid - you can hear similar to the first vid.

Manifold design also changes the sound, as does the lenght/cut of the screamer pipe itself

(14 sec-20sec) (27sec-40sec)

I miss my external gate days :)

Screamer Pipes are a wank unless you're building a fully dedicated track / strip car.

Plus it's a major defect in several states which means your car is going to get towed and end up in an impound yard for some fat bastard towie to play with.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
×
×
  • Create New...