Jump to content
SAU Community

Recommended Posts

Hi there..

Hey my R32 GTS-t has started trying to stall when cruising at about 100ks.. It hasnt done it a lot, but it gives ya a bit of a fright when your car tries to die as your driving it on the highway lol.. anyway, it seems to try and die when its cruising, not under any great load or anything.. the cars an auto, so no change in bov.. thinking it could be a fuel filter cause im not sure when it was last done, esp because of the way it drops power very fast for about 2 seconds and then comes right.. the thing im wondering here is most fuel filters ive seen are made of like a clear semi transperant plastic.. but the on in this car is quite an old looking silver tin one.. is there any chance it could still eb the factory one or something?

cheers

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/
Share on other sites

it could still be the factory one, but you will find that the replacement one will look pretty much identical. it would be worth replacing either way just to rule it out. sounds a bit weird that it is only doing it at light load. could also be an AFM issue, o2 sensor, AAC valve issue.

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5062163
Share on other sites

it could still be the factory one, but you will find that the replacement one will look pretty much identical. it would be worth replacing either way just to rule it out. sounds a bit weird that it is only doing it at light load. could also be an AFM issue, o2 sensor, AAC valve issue.

will look at changing the fuel filter and see what happens.. the only think ive changed recently is adding a full 3" turbo back exhaust.. but that was about 2000k's ago and its only started doing it now.. is there anyway way to check the o2, afm and aac valve?

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5062176
Share on other sites

will look at changing the fuel filter and see what happens.. the only think ive changed recently is adding a full 3" turbo back exhaust.. but that was about 2000k's ago and its only started doing it now.. is there anyway way to check the o2, afm and aac valve?

since the car was traveling at 80 -100km at the time of the drop, and so doing around 2.5 - 3k rpm, wouldnt that rule out the aac vavle? just trying to think of what might cause this so i have somehwere to start.. any input is welcome! cheers..

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5062207
Share on other sites

It won't be the AAC valve - that is only for idle control.

IT WILL NOT BE THE O2 SENSOR!!!!!!!!!!!!! A dead O2 sensor will not prevent the engine from running. It will simply cause an increase in fuel consumption (at worst).

It could be the fuel pump controller playing up. See if you can get a fuel pressure gauge set up and drive around a bit observing if fuel pressure has an effect.

The clear plastic fuel filters are for carburetted engines. They only need to withstand around 4psi pressure. All EFI engines run a metal canister fuel filter, so they can withstand the 3bar + fuel pressures.

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5063307
Share on other sites

It won't be the AAC valve - that is only for idle control.

IT WILL NOT BE THE O2 SENSOR!!!!!!!!!!!!! A dead O2 sensor will not prevent the engine from running. It will simply cause an increase in fuel consumption (at worst).

It could be the fuel pump controller playing up. See if you can get a fuel pressure gauge set up and drive around a bit observing if fuel pressure has an effect.

The clear plastic fuel filters are for carburetted engines. They only need to withstand around 4psi pressure. All EFI engines run a metal canister fuel filter, so they can withstand the 3bar + fuel pressures.

cheers for the help! gives me something solid to start on

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5065516
Share on other sites

clean your AFM, AAC valve with cabi cleaner. and try.

is your AUTOMATIC transmisson..? if so,

1 when it try to stall put it in to N

2 see how you feel. if u feel it want try to stall,

3 check your transmission fluid level.

drive or idel until engine get warm,

drive 1 2 3 and D and put in to R put in to N and leave it 1 min and check the level of the fluid. fluid level S/B in between L - H level. make sure your dipstick with no fluid bubles. if so do a transmission service.

I had the same prob with my car. hope ths will help u.

Hi there..

Hey my R32 GTS-t has started trying to stall when cruising at about 100ks.. It hasnt done it a lot, but it gives ya a bit of a fright when your car tries to die as your driving it on the highway lol.. anyway, it seems to try and die when its cruising, not under any great load or anything.. the cars an auto, so no change in bov.. thinking it could be a fuel filter cause im not sure when it was last done, esp because of the way it drops power very fast for about 2 seconds and then comes right.. the thing im wondering here is most fuel filters ive seen are made of like a clear semi transperant plastic.. but the on in this car is quite an old looking silver tin one.. is there any chance it could still eb the factory one or something?

cheers

Link to comment
https://www.sau.com.au/forums/topic/306106-stalling/#findComment-5065684
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...