Jump to content
SAU Community

Recommended Posts

That is great feed back to get. So it does have rust.... I think you could put a C210 in a humidity crib, and never drive it and it would still rust out :P

$10K? :):ermm:

I personally don't think he'll get that.

Be interested to see what someone will pay for it though, just wont be me.

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

The main areas are:

chassis sills and doors and along the sides of the roof.

The front guards were also prone (behind the wheel where it attaches to the sill)

Depending on the quality of the rubber seals in the boot, usually the spare wheel well, or the steel on either side of the boot (near the wheel well)

There are others, but I don't usually see more than that. Some have windscreens rusted out, but you don't know the history, as someone may have replaced the glass. The ones that I stated above are usually the ones that just happen due to poor design from Nissan

They can also get horrific rust in the chassis at the firewall at the corner of the engine bay, near where the bonnet mounts. If the windscreen leaks the dashboard can also corrode badly, taking the firewall with it!

The the metal clips in the rubber boot seal always rust - again often taking out the lip that it sits on - causing leaks, causing the wheel wheel, and hidy-hole for the tools and jack to fill with water, causing more rust etc... The bonnets rust really badly underneath at the front near the chrome trim.

To answer JDM's question, in short rust is a horrific problem for these cars.

It's not even a C210 GT-EX or what ever the turbo'd L20 version was. That's more desirable IMHO.

As far as i know the C210 2000GT-EX only came out in japan so would be quite rare in AUS.

Seriously considered going after this for about 5 whole minutes but them I thought of 33yo oil seals and hoses and prop shaft/diff seals and heater hoses and the non working A/C-"just needs gas" yep--sure and ?? wheel bearing seals etc , and the "not even driven to the shops" little old German lady ad infinitum--and I was outa there. :(

You know, I agree with this. The amount of people who advertise "body OK no dings/dints etc. and when you see the car in person it's stuffed really gets me down.

It's easy to live with those things. They can be fixed/replaced, old cars are relatively easy to work on. I've had my fair share of old muscle cars and they're piss easy to tinker. What gets me are people who say "body is perfect, not a ding or dent or whatever" but you see the car and it's not what they say it is.

Didn't meet his reserve first time around, so now one of two things will happen.

A) He lowered the reserve, everyone bids the same and it sells.

B) He didn't lower the reserve, but everyone tacks an extra $2000 onto their previous bid and the seller gets the money he wants.

Wait a minute...

C) He didn't lower the reserve, everyone bids the same, car doesn't sell again.

It'll be interesting to see what happens this time.

D) The same people don't bid because they were expecting a lower price to win. They obviously didn't want to go any higher, so perhaps a new bunch of people will now bid :D

Or not :thumbsup: --the thing has a few question marks over it now (as far as this posts subscribers may be concerned) and it may not be all roses and minty goodness, if I were an interstate bidder for this I'd certainly not punt until I'd had a good look at it 'in the tin' as it were.

I'd say you are on the money regarding a lower winning bid though.

Surely a max bid of half of what he was asking would come as a wake up call. When did anything pass in a $6000 in one week and sell for $11000 the next? Generally, relisted items work their way closer to a sale price of $0 with every auction that the item fails to find a home. I'm betting the the seller finds his pride and joy passes in for $5,500 this time around.

Meh, I was interested, but not now. I don't even care if it got sold for $6K on the knocker. Anyone who asks all the forums what the car is worth, and when told it's about $5k (classic skylines/skylines Aus/Ozdat, maybe more), and then thinks the price is going to be $10.5K due to a small minority who probably own one and want the price to go up so they can sell theirs? Forget it. He can keep it. I'll stick to trying to sell my 'reasonably priced' but willing to NEGOTIATE HR31.

Not that it make any difference, but both my 79 c210 coupe and my 81 c211 sedan had factory aircon. only my 77 coupe didnt, but it didnt have many boxes ticked at all.

cheers

Jason

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...