Jump to content
SAU Community

Recommended Posts

hey guys been stupid and pulled the pcv out cos its failed but the seal broke off and is in the rocker cover,

my question is its a large bit but does the rb25det rocker come with a baffle so it wont fall in the the engine????????????

just wont to know so that i might be able to drive the car to work so i can pull the rocker cover off and get it out, but then is it true i have to replace the rocker cover gaskets????????

please help guys

Link to comment
https://www.sau.com.au/forums/topic/308052-stupid-question-please-help/
Share on other sites

don't worry got it out wire and determination wins LOL

next question can you just block up the pcv and the out let on the plenum and not cause any problems

next question can you just block up the pcv and the out let on the plenum and not cause any problems

No, it needs to vent to some where, you could just put a little air filter on the end of it but from what i have read the car wont run the same.

from talking to many people they say cos i am running a open to air catch can being feed by both top pipe that will be enough to vent the crank case.

so blocking it off should be no problem any more.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
×
×
  • Create New...