Jump to content
SAU Community

Recommended Posts

heeeelllllllooooooooooooooooooooooooooooooooo there!!!

i got a heap of shit off the car thats never going to be going back on.. ive put rough prices down, but im negotiable on them, pm me an offer and ill pretty much accept it.

postage on the smaller stuff no probs, just add $15.00 to the price. pipes and panels pick up only unless your really desperate

here we go -

Engine -

exhaust manifold - $30

inlet manifold top and bottom - $50

throttle body - $30

fuel rail and injectors - $20

radiator - $50 (excellent condition, straight fins etc. has been in storage so needs a flush)

p/s pump - $20

alternator - $30

cross over pipe with standard bov - $30

intake pipe to turbo - $20

RB20 turbo - $150 - good condition, done 113000kms, always run standard boost since in country

stock intercooler, bracket, duct, and some piping - $40

RB26 alloy engine mounts - $30 (was going to see if i could modify to fit 2wd but no dice, may aswell just make new ones)

p/s steering rack - $40 complete, tie rod end to tie rod end.

p/s lines - $10

a/c condensor - $30

a/c fan - $20

and

old skool HKS bov with pipe, plastic one, green insert, makes a cool 2 stage krschch-krisssch noise, no leaks, $50

S14 SR20DET crossmember - $70, good condition, straight bolt up to r32, thought about putting an SR20 in at one stage.

Interior

climate control unit - $50

heater box - $30

a/c evaporator - $30

blower unit - $30

boot trim and carpet - $30 (has neat cut outs for rear strut brace)

Body

Bonnet - $70, excellent condition, gun metal grey

Bootlid with wang - $60 as above.

Front Guards - $100 each, both have a little scratching from careless people working over them over time.. but both good and straight.

RH tension rod - $25

RH R32 control arm - $40

i also have the complete hicas system front to back and all the a/c pipes and condensor

im always on here during the day, but not at night, so pm me or sms 0431646160, you can call if you like, but probably i either wont pick up if i dont know the number, or ill be away from the phone and wont hear it.

cheers

Linton.

Link to comment
https://www.sau.com.au/forums/topic/308579-massive-r32-gtst-parts-sale/
Share on other sites

Any chance i can get some pics of the gaurds?

Thanks

sure thing boss... ill get some when i get home and post them up first thing tomorrow morning. im over my d/l limit at home so it will have to wait till i get to work at 8am.

they have been hanging on the wall since removal, so they are still fresh and straight.

Mate,

Do you have a dash pad in good condition?

i do, its in perfect condition, no bubbles or anything.

im willing to sell it but, it must be a decent cash offer + your dash pad.. im covering it in suede so the condition doesnt worry me. aslong as its in ok nick.

dash window demister plastic vents in good nick?

i do, and they are... but id need a reasonably good offer plus your old ones to consider it.

cheers

Linton

id like to add...

the stock items that im keeping are for rego purposes only... so they dont need to be in good nick...

as my interior is in perfect condition and dash parts and consoles getting redone with suede and carbon... i will consider exhange for your crappy items + cash for the majority of stuff.. door trims, seats, roof trim, etc.

im also selling the gearbox as ive decided to go with an RB25 box... its in good nick, done 113000 kms. $500 ish?? is that reasonable??

i can organise freight for the bigger stuff, but it will cost you accordingly.. unless you have a freight account.

ok guys...

im going away until thursday on a well deserved holiday to the mountains of bellingen.. ill have my laptop and phone with me, but im not sure how good reception will be,

i will reply to all requests upon my return..

to those that have transferred money into my account already, your items will be ready to be sent by express post and will be posted by my workmate next week upon my instruction.

so if i dont reply.. do not fret, i will be back.

demister vents sold.

middle vent pending

GreenR32gtr... i do have the lhs vent.. its in good nick.. reverse lights no good sorry... one is cracked.

also guys... i got some of the interior bits out today, they are not as good as i thought, the dash pad has a bubble on the lhs of the instrument cluster.. and a gauge has been placed on top of the instrument cluster.. not what id consider perfect..

the carpet has a hole where your lh heel is.

and the boot trim, although good.. has a few stains that werent visible when in the car.

i removed the interior at 2am and didnt give it a 2nd look.. put it straight under covers and stored it away.

so check with me if you want some interior bits and ill give it a good check over before telling you its good to sell.

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...