Jump to content
SAU Community

Recommended Posts

I have noticed that cruise control is a very rare option on the M35 and it is even rarer to find a car with both the audio and cruise control buttons on the streering wheel.

In the USA the Infiniti G35 looks to have exactly the same steering wheel but with both audio and cruise control buttons as standard.

Does anybody know if it would be possible to buy a G35 steering wheel from the USA, fit it to an M35 and use the audio buttons to control an aftermarket head unit and the cruise control buttons to control an aftermarket cruise control unit such as the AP800?

Edited by neotropic
Link to comment
https://www.sau.com.au/forums/topic/308910-m35-steering-wheel-controls/
Share on other sites

I have noticed that cruise control is a very rare option on the M35 and it is even rarer to find a car with both the audio and cruise control buttons on the streering wheel.

In the USA the Infiniti G35 looks to have exactly the same steering wheel but with both audio and cruise control buttons as standard.

Does anybody know if it would be possible to buy a G35 steering wheel from the USA, fit it to an M35 and use the audio buttons to control an aftermarket head unit and the cruise control buttons to control an aftermarket cruise control unit such as the AP800?

You don't need a new steering wheel. You get these features fitted locally.

The Stereo unit is about $60 and there is a DIY on the forum for this.

The Cruise control is not a DIY, but Chris Rogers (Audio Express) can install cruise control and uses the factory buttons so it is a very neat job. Cruise on these cars is not a cheap option as the throttle is controlled electronically. But it is good to have IMO.

Chris is on this forum so you can send him a PM or get his phone number from my signature below.

Cheers

Andy

You don't need a new steering wheel. You get these features fitted locally.

The Stereo unit is about $60 and there is a DIY on the forum for this.

The Cruise control is not a DIY, but Chris Rogers (Audio Express) can install cruise control and uses the factory buttons so it is a very neat job. Cruise on these cars is not a cheap option as the throttle is controlled electronically. But it is good to have IMO.

Chris is on this forum so you can send him a PM or get his phone number from my signature below.

Cheers

Andy

Where does one get the steering wheel controls for the stereo. . .

How much is the cruise control. . I agree worth it for the long trips and better on fuel I would suspect. .

Where does one get the steering wheel controls for the stereo. . .

How much is the cruise control. . I agree worth it for the long trips and better on fuel I would suspect. .

Chris rogers for both stereo controls and cruise control. I believe it is around $900 for the cruise control.

Cheers

Andy

You don't need a new steering wheel. You get these features fitted locally.

The Stereo unit is about $60 and there is a DIY on the forum for this.

The Cruise control is not a DIY, but Chris Rogers (Audio Express) can install cruise control and uses the factory buttons so it is a very neat job. Cruise on these cars is not a cheap option as the throttle is controlled electronically. But it is good to have IMO.

Chris is on this forum so you can send him a PM or get his phone number from my signature below.

Cheers

Andy

Hi Andy, I was wondering if you could post the link to the DIY for the stereo controls... I can't seem to find it... Cheers

Hi Andy, I was wondering if you could post the link to the DIY for the stereo controls... I can't seem to find it... Cheers

ooopppss. sorry my bad. I is not on here. I mus have been told on a phone call.

Before you start this procedure make sure you turn your stereo off and the CDs are correctly parked in the mechanism.

The basic procedure is.

1. DISCONNECT BATTERY

2. remove screws on either side of steering wheel, on the back facia of the wheel behind a little pop in bolt cover. This screw is a torque head screw (star pattern). This can be quite tight as it has lock tite on it.

3. The centre of the steering wheel will no come out (the airbag), as you pull out you will see a plug connecting it to the car on the top edge. This plug has a safety mechanism to stop the plug poping out. The black part of the yellow plug needs to be lifted up to release the plug. Put the Airbag aside.

4. You can now see the horn mechanism that floats on the inside. On the left side you will see a grey plug with a wire running from it connecting to the horn mechanism. Remove this grey plug as your new controller will replace this.

5. Undo the central nut holding the steering wheel in place.

6. Once removed you will need to undo the screws that hold the horn mechanism in place, this will release the pannel that covers the access to back of the steering wheel.

7. You should now have access to the back of the steering wheel to undo 2 screws that hold the silver blank in place. Undo and replace with controller.

8. Run wires around and plug grey plug into hole.

9. Do the reverse of dissembly to complete conversion.

This should not take more than 1 hour.

Good luck.

There is good thread on the G35 Driver forum in the USA which is a guide to replacing both the audio and cruise controls:

http://g35driver.com/forums/body-interior-...3-04-coupe.html

I presume it would be a similar procedure for the M35.

tis exactly the same.

as for cruise control $900 fitted in any state. the unit will be sent to a workshop for fitting. buttons fit ON THE WHEEL.

as for fitting the buttons it to ANY cruise unit - nup! this is a custom unit I had done and I market it as such. buttons are NOT stock either.

tis exactly the same.

as for cruise control $900 fitted in any state. the unit will be sent to a workshop for fitting. buttons fit ON THE WHEEL.

as for fitting the buttons it to ANY cruise unit - nup! this is a custom unit I had done and I market it as such. buttons are NOT stock either.

Pics please

here you go:

DSC_3210r.jpg

UNIT

DSC_3211r.jpg

buttons in place.

from memory this was a M35 stagea that I used for the photo. the radio controls are a by product of the cruise. if you have the integrated 6 CD unit then they will simply work.

Edited by Chris Rogers

ok I'll post a link up. my IP lockout thing must be in play. I can see the images and I forget that everyone else cannot.

click this:

http://www.audioexpress.com.au/site/index....rt&Itemid=1

Chris,

Can you also modify the cruise control / audio control to lit up the steering wheel?

So at night, they can be seen?

Like this DIY on the G35Driver.com?

http://g35driver.com/forums/body-interior-...3-04-coupe.html

the later G35 WAS lit. the button set was different and had a lighting feed INTO the column. they light up green. in that case he swapped them out for the later items. nothing new there. and to be honest - not worth it. the lights are fairly dull in comparison to the dash lighting. I CAN get those switches but they are TWICE as expensive as the ones I currently use.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
×
×
  • Create New...