Jump to content
SAU Community

Recommended Posts

GTR Parts suit 32/33:

r32 gtr diff perfect condition very low k's mech lsd $650.00

R33 gtr A lsd, perfect condition low k's $450.00

R33 gtr rear axles perfect condition $200.00

R32 gtr Rear alloy hubs $150.00

R32 gtr booster and master $120.00

R32 gtr ABS unit $100.00

GTR diff modified for rwd $300.00

R32 gtr rear cradle $40.00 (bare) needs bushes and clean up

R32 gtr rear calipers $200.00

R33 gtr twin exhaust from twin td05/6 turbo set up 4" single after diff (big power system)$550.00

XTR/subzero 62mm ext wastegate huge gate never used V bands included $800.00

R32 gtr gearbox good condition push type $500.00

Apexi air pods good condition $120.00

HKS mushroom air pods $100.00

GTR front pipe twin 2.5" stainless x something brand $150.00

R32 gtr standard rods n pistons x6 $250.00

GTST 4.1 viscous lsd good condition in $200.00

GTST ghetto 3" dump pipe, has flexi joint and some repairs worked fine $80.00

Stagea auto box (cut wiring) ran perfect $150.00

Stagea dash c/control pieces 78000ks = offers

post-15049-1266737210_thumb.jpgpost-15049-1266737231_thumb.jpg

post-15049-1266737389_thumb.jpg

I have more parts to add and will update pics as I can, location: South of brisbane phone 0431787453

More pics..

post-15049-1266740159_thumb.jpgpost-15049-1266740191_thumb.jpg

post-15049-1266740220_thumb.jpgpost-15049-1266740245_thumb.jpg

post-15049-1266740259_thumb.jpgpost-15049-1266740281_thumb.jpg

post-15049-1266740298_thumb.jpgpost-15049-1266740321_thumb.jpg

post-15049-1266740351_thumb.jpg

Edited by rb30dett
Link to comment
https://www.sau.com.au/forums/topic/309090-gtr-gtst-stagea-parts-clear-out/
Share on other sites

Some reason I can't edit?

Power fc + controller suit r32/33 gtr $850.00

Stagea 5 stud hubs front & rear suit 5 stud conversion $150.00

Jaycar boost and fuel controllers wth hand controller $140.00

HKS coilovers suit 33/34 gtr perfect condition just little surface rust $950.00

R32 hicas rack $30.00

R33 hicas rack $50.00

Edited by rb30dett

More:

rb25det ser 2 from stagea so 4wd block short motor $300.00

rb25det complete head, cams valves etc vgc $600.00

GTST used turbo, needs seal kit bearings good wheels good just leaking oil past seals $120.00

GTR standard dumps $50.00

The following parts will not be removed until deposits are taken for all.

Have a Mines step 3 package on the stagea so will be selling (rb26)

HKS 2530's older style with HKS cast iron dump pipes $2200.00 vgc

Mines afm's plug in same as nismo's but these are supposed to be better $500.00

Mines ecu tuned for 2530's afm's 600cc injectors and fuel pump (runs great) $300.00

Nismo purple 600cc injectors been cleaned and flowed resently $600.00 pc

GTR 600 x 300 x 100 mm cooler looks like greddy but no markings $500.00 vgc

Will do a package deal for the lot $3500.00 300rwkw easy This is advertised locally so may sell off the forum.

Standard gtr sump & diff $300.00 vgc

R32 gtr front subframe vgc $150.00

R32 gtr steering rack vgc $120.00

R32 bare front cut $200.00

R32 gtr steering colum with key $100.00

R33 standard ecu $200.00 pc

Edited by rb30dett

Sorry for the delay guy's I work long hrs

KamikazeNinja34: Are you talking the location of the speed sensor? its front.

JnJ: South Maclean/Jimboomba

ydawak: No sorry not stagea

Front pipe & HKS pods sold

Make some offers I need the space.

Edited by rb30dett

thanks heaps paul, good to meet you..guys very easy to deal with, good prices.... highly recommend!!!

bought GTR front pipe and HKS filters :)

Edited by nissan32GTR
lol i mean that for a car thats purported to have two diffs powering its awd system, my rear diff is starting to lock up :P

So you want a rear GTR diff then? A lsd or mechanical? don't think there is a diff between ser1-3 only Vspec or non Vspec I also have a Stagea diff they are all in perfect working condition, The diffs listed are rear diffs there are pictures of both?.

Cheers

Edited by rb30dett
Standard gtr sump & diff $200.00 vgc

R32 gtr front subframe vgc $80.00

R32 gtr steering rack vgc $80.00

R32 bare front cut $200.00

R32 gtr steering colum with key $80.00

R33 standard ecu $200.00 pc

Prices are neg throw me some offers

  • 7 months later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...