Jump to content
SAU Community

Recommended Posts

Ok by now we have read th usual of lowlifes breaking into our cars. Mine is just another in the long list...

The fubard the passenger lock with screwdriver or scissors, got in, pulled everything out of cernter console and got sprung by ME.

jumped into their car and drove off

I proceeded to follow.

Engaged in an at-distance pursuit, ending in Coyone Street Gowrie. (I assumed the guise of a normal driver, melt into the traffic, no laws broken)

I withdrew because I wasnt familiar with the area.

Got numberplate, occupant description, car make/model. Went to Woden Police station, there was another lady in there giving statement that her car got broken into around the same time, she had a white serII R33 manual. got her cd's and ciggies gorne but the security got to her car befor they could disable the alarm.

Police actually have a list of known skyline breakers, will get back in contact with me tomorrow.

Now Im reseacrching paging alarm systems. and air compressors and slim-line truck horns

Link to comment
https://www.sau.com.au/forums/topic/309997-skyline-broken-into-woden-carpark/
Share on other sites

Bad luck Andrew.

Rather than installing a louder horn and hoping people who hear it will actually care, you are better off hiding a 120db piezo siren inside the cabin triggered by either an alarm or a simple timer circuit. No way anybody could sit inside your car while that was going off. Jaycar sell them.

Bad luck Andrew.

Rather than installing a louder horn and hoping people who hear it will actually care, you are better off hiding a 120db piezo siren inside the cabin triggered by either an alarm or a simple timer circuit. No way anybody could sit inside your car while that was going off. Jaycar sell them.

This would be good if I didn't occasionally set my alarm off while I'm sitting in my car..

I'd be interested in any info you could give on those John. I'd be very much keen on it, just don't know what I'm looking for lol...also yeah something on a timer, say, 30 seconds after initial alarm goes off would be good.

Obviously a quality alarm/immobiliser and GPS tracker are always the best option, but can be a bit pricey.

Unfortunately the guys who break into your car just to steal the stuff in your console and glovebox will often ignore the alarm going off, grab your stuff and take off anyway. Having a very, very loud siren inside the cabin is going to make that a very uncomfortable experience for them. As Giveway pointed out, it can also be painful for the owner if they trip the alarm by mistake.

It never ceases to amaze me though how many people don't have any security at all on their car, sure not everyone can afford a $1K system, but there are lots of cheaper options that are better than nothing. A simple immobiliser circuit can be built by anyone who can hold a soldering iron for about $20, or even less if you have the parts lying around.

Places like Jaycar have heaps of good stuff, you just need a basic knowledge of electronics and a bit of imagination. Not going to publish details here, but happy to give you some ideas via PM if anyone is worried about their ride.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...