Jump to content
SAU Community

Recommended Posts

Guest 33GTS25

this may be a tip that most people know but there will be some amongst us that dont know it.this tip was given to me by a mate who's dad used to own a car yard.

have you ever finished washing and polishing your car and stepped back to have a look at your baby but only to be upset that your tyres are dirty still and detract from the overall gleam. if so

pour a little armorall into a jar and brush onto the sidewalls using a small paintbrush i.e 1" brush(buy from crazy clarks for 50c). armorall will have the consistency of milk when painting but just keep walking around the car touching up as necessary. this will bring the tyres back to that shiny new look they had when you first bought them and when re-applied for a couple of coats the sheen just gets deeper without having to worry about runs etc that you get with tyre black(and its cheaper).

be careful to not paint past the sidewalls and onto the tread pattern as we all know how slippery armorall gets.

hope this helps at least one of us.

rod

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/
Share on other sites

Guest 33GTS25

if its something really greasy why dont you take each wheel off and try to scrub it with laundry powder, the powders granules should help lift the grease without scrathing your sidewalls.

i.e wet the tyre first pour a little powder on the tyre and start scrubbing a 30cm section at a time this will give you an indication of how you are going before you atempt al the tyres

rod

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10295
Share on other sites

pour a little armorall into a jar and brush onto the sidewalls using a small paintbrush i.e 1" brush(buy from crazy clarks for 50c). armorall will have the consistency of milk when painting but just keep walking around the car touching up as necessary. this will bring the tyres back to that shiny new look they had when you first bought them and when re-applied for a couple of coats the sheen just gets deeper without having to worry about runs etc that you get with tyre black(and its cheaper).

hope this helps at least one of us.

rod[/quote:d776b278ca]

Hey Rod,

How long does it usually stay black for? I used to do this but then found that it didn't last that long. I currently use hmm.. I can't remember what its called. Its made by Turtle Wax in a green bottle and it's called ***** Extreme. Pretty good stuff as it actually makes kinda like a silicon clear coat over the tyre hence not affected by water.

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10296
Share on other sites

Guest 33GTS25

xrsist. i gotta admit that i dont know how long it lasts, as yesterday was the first time i have done it, but then it only takes 5 minutes to run around the car and reapply after you have finished your weekly wash/vacuum routine

i haven't seen this turtle wax stuff but it may also be a good option, remember that nothing will last forever though.

rod

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10297
Share on other sites

Guest 33GTS25

jimbo, if your neighbours haven't commented yet on your dedication to your car then you are not committed enough.

other members of the complex that i live in know that i wash every saturday afternoon unless there is a cruise and i do it in the morning. the advantage of this is that they make sure there car is not in my way. it helps being a 6'1" black man sometimes :twisted:

you'd be surprised the many applications that washing powder has :wink:

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10299
Share on other sites

Guest 33GTS25

well jimbo you must have the rest of my body as i seem to be white from the waist down. i.e i think i must be hung like my mothers side of the family :lol:

if people comment on doing each wheel at a time, you should tell them that your baby is in foal and will be coming back with a godzilla, this will surely confuse them even further

rod

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10301
Share on other sites

nah Jimbo, it's just spray-on stuff! Very lightweight....sprays on like...errr for want a better word....hairspray LOL :lol:

Doesn't last very long tho - it's more just to pretty it up for the day, and it doesn't clean them either, you have to apply it to clean tyres.

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10306
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey crew, Failed my WOF cause of a lower control arm, and I've decided to hit both arms, and also the compression rods at the same time(seems they're gonna be the most likely upcoming failure points from some discussions with the lads over on the G35 reddit). I've looking at these form Z1:  https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-compression-rod-p-40716.html https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-lower-control-arm-p-40674.html I asked Z1 if they'd work as it's the same platform, just RHD vs LHD. I basically got told "Lol dunno". Specifically they aren't aware of any difference but can't guarantee fitment as they haven't done it on a 350GT. So guess I'm asking is if there is any issues with using 2005 G35 coupe suspension parts on a 2005 350GT coupe? Orginally I thought it could be something in the way of the arms that each control arm is designed to be positioned around, but that'd be an engineering nightmare for Nissan needing two different shaped control arms 😅
    • ^ This. The mode door actuator is a common failure, as is the actuator and/or the actual valve for the coolant flow control valve. I also don't know how available the mode door actuator is these days. I've been meaning to look into it and get one from wherever is possible, to keep in the shed for the rainy day when mine eventually fails. Anyway, the advice to you is to search the usual NOS part supply places, or even just go to Nissan and see what they list.
    • Have you got a pic of the actuator? My guess is that unit has failed internally and was flopping around, so the previous engineer who owned it forced it to be fully open to cold air (blocking the heater core path). As far as you can tell, is anything else wrong in the system? Likely you just need a new actuator (not sure how available they are) and then "installation is the reverse of disassembly"
    • I'm happy with the Lsailt unit that I put in, it puts full Android on the top screen so you can run whatever Nav and other Apps you want, while still existing inside the factory functionality like automatic reverse cams, audio input switching, retains factory bluetooth etc. Not cheap and the install was moderate (not simple, not hard) Yours is a V36 not V37 though right?
    • Yeap, all the NC's that I originally looked at that had a hard top were PRHT, which makes the roof line look horrible, hence why I said nope to them My only caveat for another MX5 was it needed to have a hard top, and initially I didn't think you could get a detachable hard top for the NC,  like my NB had Again, a big thanks to Matty for helping me source the detachable hard top for my little girl, they are as rare as hens teeth in Australia, and the few people who have them, keep them Also to Greg, for initially pointing me in the NC direction NC PRHT 🤢🤮 Not mine (I really should take more photos of my car), but a NC with the detachable hard top 😁 To me, the difference in how the detachable hard top roof line looks, and how it actually follows the bodies lines, like they do on NA's and NB's, is chalk and cheese compared to the bulbous looking PRHT  
×
×
  • Create New...