Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

Taken from the Meguiers website:

Endurance Tyre Protectant Gel

Finally, a tyre protectant that lasts weeks, not days… even after rain and washing.

Endurance is a significant advancement in tyre protectant technology, providing a rich, dark "like new" look for weeks longer than you expect with ordinary protectants.

Endurance is a concentrated gel that saves you time and money by eliminating overspray, runs, drips, spotted driveways, messy cleanup and stained towels.By lasting longer, it also saves you money because it requires fewer applications.

An added bonus is that Endurance contains revolutionary antiozonants and protective polymers that help prevent browning from environmental elements.

This keeps your tyres looking true black.

No runs, overspray or stained driveways

Comes with special applicator

Available in 'natural look' and high gloss finishes

Now in 16oz/473ml size for even better value

It doesn't state anywhere in there about silicon, so I guess they must of had that previously but has now removed it from the contents.

I'll probably go and buy a bottle and compare it with what i got and see how we go.

  • 2 weeks later...
Originally posted by JiMb0

Cool, any ideas how to get the black crap off my tyres that was put on at the auction yard in Japan ... it's like a sticky tar  substance .... not good ... I think next weekend I'll take each rim off one at a time and clean them down thouroughly with some degreaser.

JiMbO what is with the black tar shit that gets sprayed all over cars in japan? Check this 33 out, it also copped some on the front bumper.

  • 2 weeks later...

I use the Meguiars Endurance stuff, and it's great.

Easy and quick to apply, comes with the applicator, no cleaning needed unless your tyres are that REALLY horrible brown/grey colour, and lasts ages!

Speaking of which, my car needs a wash and service (at least an oil and filter change)...

I just use 'auto king bumper and tyre spray' Its cheaper then the brand name stuff, its silicone spray so its naturally shiny, and wont do ****e to your tyres. If you really wanna get it off, just use wax and grease remover, no worries.

And BTW, that photo of the R33 with the black stuff on the bumper looks more like the car infront of it got started up, and blew a heap of rich running black fuel all over it...:D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...