Jump to content
SAU Community

Recommended Posts

i have now done all the basic mods on my 34, intercooler, oil cooler, full exhaust hiflow cat, air intake. The suspension (bilstein hieght adjustable with unknown springs) in the car atm is very hard and the rebound is very jerky on the street but good for the track. i can deal with it for the time. Now im up to the next stage. I went to centerline and they said i should do all my camber and castor bushes. but i also could go for a nistune or i could go for BC coilovers. My question is what will make the car better for the track - camber/castor bushes ($1000), BC coilovers ($1200) or nistune ($750). Problem i can only go for one of these atm. WHICH ONE!!!!!!!????? 

Link to comment
https://www.sau.com.au/forums/topic/310020-what-to-do-next-trackstreet-r34/
Share on other sites

you can get a whole lot of new bushes as a kit on ebay for ~$700

includes Control Arm Lower - Inner Bush, Control Arm Upper - Inner / Outer Bush

Steering Rack Mount Bush - Power Steering, Strut Bar To Chassis Mount

Control Arm Lower - Inner Bush, andX 2 Control Arm Rear - Lower - Toe Adj Arm

have you upgraded the swaybars at all? best bang for buck $500 front/rear swaybars, whiteline

nistune would be a great option too, however Id suggest brakes & suspension first.

+ slotted front rotors dba 4000 series - $400 ebay

+ braided front & rear brake line kit - $270 ebay, adr approved

+ master cylinder stopper - $70 ebay

+ qfm a1rm brake pads front rear - $240 sau

+ whiteline swaybars - around $250 each for front & rear

a good service,tune is paramount for a trackday too!

A full set of camber and castor bushes plues labour should be no where near $1000.

Buy them yourself through whiteline and install them yourself, fairly easy to do. You will just need to get some one with a hydraulic press to press the old bushes out.

For that $1000 you should be able to get all the bushes, get some pineapples and a HICAS lock bar.

A full set of camber and castor bushes plues labour should be no where near $1000.

Buy them yourself through whiteline and install them yourself, fairly easy to do. You will just need to get some one with a hydraulic press to press the old bushes out.

For that $1000 you should be able to get all the bushes, get some pineapples and a HICAS lock bar.

i got a quote for superpro bushes it was 650 for front and rear does camber and castor. got pineapples done already. oil the good oil etc, im using qfm but still need discs ill research the busshes more. cheers

#1 Good set of track tyres... all the susp under the sun cant help you unless you have grip.

#2 Brakes... brakes brakes brakes... Good front rotors, good track day pads, good fluid and hoses.

People get too far ahead of themselves with the shiney gear...

After that:

Track wheels

Bushes and alignment

Radiator

Nistune

i got a quote for superpro bushes it was 650 for front and rear does camber and castor. got pineapples done already. oil the good oil etc, im using qfm but still need discs ill research the busshes more. cheers

Whiteline rear camber kit is around $120-$150

Whiteline front camber kit is around $130-$170

Whiteline front castor kit is around $100-$120

So really it shouldn't be more than $500

I got all mine for around $340. Ring up an Autobarn or something near you, give them the part numbers (KCA348, KCA331, KCA347), ask what the best price they can give for all three. Autobarn do a 10% off RACQ discount so ask for that after. Definetely can get them for less than $650. Your call.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...