Jump to content
SAU Community

Recommended Posts

Have been researching what vehicles can be imported and it seems that SEVS indicates that its OK to bring in a new only GTR with a build date before 20/2/2009.

http://www.raws.com.au/SEVSRuling.asp?RulingID=477

http://rvcs-prodweb.dot.gov.au/sevs/477-01.htm

Can anyone confirm that this is correct and if it is even possible to find a new GTR with a build date that old?

Cheers

Peter

Link to comment
https://www.sau.com.au/forums/topic/310022-importing-r35-gtr/
Share on other sites

Hey Peter

I can tell you it's definitely possible to find a new GTR with a build date before Feb 2009 but it's obviously will become increasingly harder to find them as time goes on.

The last one sold new through the auctions had a build date from 2008 and was sold for 5,800,000 yen which is very good value.

My understanding (based on the detailed response from clearly more informed sources - the likes of Beer Baron, Iron Chef and Monster Imports), is that it is not only necessary to source a GTR with a build date that pre-dates this point in time (early 2009 or whenever) BUT ALSO that the car must be limited to somewhere in the vicinity of 200klms (2000?) on the clock. In other words;

* only a demo model would suffice

* even then it would likely exceed the mileage constraint

* even if it didn't exceed the mileage constraint it will have been located by many other interested parties

* even if it had not been purchased there is no way that it will sell as cheap as other such GTR's - the Japanese will be very aware of its desirability in Australia, and I would see such as example fetching closer to the 7M Yen FOB mark, which would see this landed for circa $120K (7M Yen = app $90K AUD, plus $4.5K duty, $10K GST, $2K shipping and $15K LCT - all approximations).

But I stand to be corrected.....

prices on these cars fluctuate wildly depending upon the 'saleability' of the car.

witness the discrepancy in price between a pre 5/99 RX7 and a 6/99 RX7 - not so much now, but 3-4 years ago there was a 30% difference in price. Didn't matter if other ineligible 99 RX7's were cheap - what mattered was that the Japanese had a ready market for 6/99 and beyond RX7's in Australia, and so the price escalated.

1. Re the question of eligibility re mileage, This is an instructive read....... http://www.skylinesaustralia.com/forums/R35-Gtr-t276825.html. It basically highlights both the extreme improbability and the exceptional risk associated with such an importation.

2. If you can source me an R35 GTR for below 6M Yen FOB that is eligible for import under SEVS legislation (and full road registration) - consider me a highly interested (willing and able) party. I suspect you'd find another 20 people on this forum would be the same...

Has anyone on the forums actually imported such a vehicle in the last - say - 6 months?

Edited by GreenR32GTR
My understanding (based on the detailed response from clearly more informed sources - the likes of Beer Baron, Iron Chef and Monster Imports), is that it is not only necessary to source a GTR with a build date that pre-dates this point in time (early 2009 or whenever) BUT ALSO that the car must be limited to somewhere in the vicinity of 200klms (2000?) on the clock. In other words;

* only a demo model would suffice

* even then it would likely exceed the mileage constraint

* even if it didn't exceed the mileage constraint it will have been located by many other interested parties

* even if it had not been purchased there is no way that it will sell as cheap as other such GTR's - the Japanese will be very aware of its desirability in Australia, and I would see such as example fetching closer to the 7M Yen FOB mark, which would see this landed for circa $120K (7M Yen = app $90K AUD, plus $4.5K duty, $10K GST, $2K shipping and $15K LCT - all approximations).

But I stand to be corrected.....

agreed with you.

car has to be less than 200km

it's hard to find 2008 R35GTR and only done less than 200km

i will expect 7m+ for less than 200km 2007~2008 R35

7 mil yen will be pretty steep for a new R35 that's already outdated by the 2010 models. Like I said before, 5.8 mil yen was the last one sold, and that before was one at 6.2 mil yen.

i guess you not understand what he said!!

car has to be under 200km.

if you can find R35GTR 2007~2008 done less than 200km for 5.8M yen.

put me down. i will take one

also got 2 other mate keen for this :P

cheers

I'm not here to cause arguments, seriously. I'm just stating what I have seen that has gone through the auctions. If you choose not to believe me, then that's fine, I really dont care. But for anyone who does have access to past sales, then look it up.

Like I said on my first post above, WAS NEW, NOT USED. Sold this month. Standard car, not black or premium. 2008 build date. Grey colour. ZERO kms. GRADE 7. SOLD 5,800,000 YEN.

Will there be another one like this to come up for sale? Possibly.

When? Who knows, could be this week or could be next year.

Price? Again it depends on the day and how many ppl are interested in the car. Could be 5.8, or less or more.

My point is that anything is possible.

Theres heaps of 2008 GTR35 on goo now. Many have around 300kms, about 10 have less than 200kms, a couple have less than 100km, prices varying from 6mil to 8mil.

Where abouts can you check them out? Are they standard stock and could be brought in under SEVS?

Thanks everyone for confirming that technically its still possible to import and register a R35 GTR.

1. Re the question of eligibility re mileage, This is an instructive read....... http://www.skylinesaustralia.com/forums/R35-Gtr-t276825.html. It basically highlights both the extreme improbability and the exceptional risk associated with such an importation.

Has anyone on the forums actually imported such a vehicle in the last - say - 6 months?

Based on what Beer Baron experienced it does not seem practical considering the level of risk involved.

I agree It would be good to know if anyone has successfully imported and registered a GTR in the last 6 months.

Guess I will need to keep looking for the right R34 to import and forget about ever getting a R35... :down:

Where abouts can you check them out? Are they standard stock and could be brought in under SEVS?

Heres a link - Goo

Any car agent in Japan should be able to source from goo. If youve got 70K to import one of these, you could probably afford to get a modified one and take the mods off for compliance. Then again, most are stock anyway. :down:

Edited by BigWillieStyles

Yeah most agents can source one through goo.

Problem for us (as the customer here in Australia) is that such markets don't quite offer the assurance that an auction system does (yes the merits of auction grades are debatable but they're a better alternative to buying on the basis of a 'vendor report').

And so any agent will be happy to buy you such a vehicle - they get their commission up-front and risk-free.

Too bad for the Aussie customer who lands it to find out that it has structural repairs, and their $70K import is ruled 'for the scrapheap'.

And re the $70K, these numbers just keep getting better and better. Give it another 6 replies to this thread, and the cost will be down to 3 slabs and an S13 trade-in!

Even assuming that one could be sourced via the auctions at 5.8M yen (and an ELIGIBLE model can't), this is still 6M Yen FOB. To my reckoning, at a cross-rate (today) of 80.1, most financial institutions will give you a buy rate of circa 78 Yen. So this would be $77K just for the purchase. And $102K landed, pre-compliance.

Given my estimate of 7M Yen sale price, and circa 7.2M Yen FOB, I get a landed cost of $125K pre-compliance. I have no idea what compliance is worth (I'd budget $7500 total cost), which means $133K ready to register.

Anyone who seriously has this cash ($140K) may just as well buy locally.

An import of an R35 GTR only becomes 'attractive' at circa $110K inc compliance (although everyone will have a different tipping point), which again requires a car to be sourced, Grade 7A, at 6M Yen FOB.

And - given that T400 has several friends interested, as am I - I am sure a purchaser in Japan could then extract a slightly higher price.

Re JDM P - I'm with you, not here to agitate, but to spell out the realities that accompany the technicalities, not only to potentially save some poor soul, but also to reduce the chatter (...I know, it's chatter of my own doing).

Edited by GreenR32GTR
Yeah most agents can source one through goo.

Problem for us (as the customer here in Australia) is that such markets don't quite offer the assurance that an auction system does (yes the merits of auction grades are debatable but they're a better alternative to buying on the basis of a 'vendor report').

And so any agent will be happy to buy you such a vehicle - they get their commission up-front and risk-free.

Too bad for the Aussie customer who lands it to find out that it has structural repairs, and their $70K import is ruled 'for the scrapheap'.

And re the $70K, these numbers just keep getting better and better. Give it another 6 replies to this thread, and the cost will be down to 3 slabs and an S13 trade-in!

Even assuming that one could be sourced via the auctions at 5.8M yen (and an ELIGIBLE model can't), this is still 6M Yen FOB. To my reckoning, at a cross-rate (today) of 80.1, most financial institutions will give you a buy rate of circa 78 Yen. So this would be $77K just for the purchase. And $102K landed, pre-compliance.

Given my estimate of 7M Yen sale price, and circa 7.2M Yen FOB, I get a landed cost of $125K pre-compliance. I have no idea what compliance is worth (I'd budget $7500 total cost), which means $133K ready to register.

Anyone who seriously has this cash ($140K) may just as well buy locally.

An import of an R35 GTR only becomes 'attractive' at circa $110K inc compliance (although everyone will have a different tipping point), which again requires a car to be sourced, Grade 7A, at 6M Yen FOB.

And - given that T400 has several friends interested, as am I - I am sure a purchaser in Japan could then extract a slightly higher price.

Re JDM P - I'm with you, not here to agitate, but to spell out the realities that accompany the technicalities, not only to potentially save some poor soul, but also to reduce the chatter (...I know, it's chatter of my own doing).

Hi mate

good point

if you can get me one for 100k landed and complied.

i am keen for it.

not going to waste your time.

but you 100% sure. you can get one 2008 with less than 200km for less than 100k landed and complied?

pm me your contact number. i am ready for one.

i am sure a lot people one the forum will happy to pay you 100k for brand new JDM R35GTR

thank you

Heres a link - Goo

Any car agent in Japan should be able to source from goo. If youve got 70K to import one of these, you could probably afford to get a modified one and take the mods off for compliance. Then again, most are stock anyway. :down:

Thanks, will check it out...

I hate to burst some bubbles, but it isn't just a matter of finding an R35 that has less than 300km on the odometer and built before Feb 2009 - if it were that easy, agents across Japan would be buying early models and fiddling with the odometers accordingly.

DoTaRS requires extensive paperwork to prove that you bought the car NEW from a dealership, you're not allowed to buy them from auction.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...