Jump to content
SAU Community

Recommended Posts

Hey guys,

Prices do not include postage and I'm hapy to hear offers if you have'em. Happy to freight at your expense and pickup is fine from Albury Wodonga. I'm also after some stuff so see below.

1x 52mm AutoGauge Smoked Oil Temp Gauge - $40 - very good condition and comes with all wiring, sender, mounting bracket and can throw in a cup if you want.

1x Hi Flow Cat 3" flanges with bung for temp sensor. Came on the car, good condition, replaced with de-cat pipe. Dunno what these are worth $120

1x Pioneer Super Tuner IIID. Detachable face, plays mp3's etc. All working fine $50

1x Pair of Pioneer 6" Speakers $30

1x Pair of Sony Xplod 6" Speakers $30

2x R32 GTS-T Type M seats (inc rails) - $50 - Very good condition, one tiny cig burn on drivers seat as shown below. Disregard the light dents in the bases, it's because I had them sitting upside down on each other. The light circle in the headrest of seat on the right is from the camera. More pics as requested. These don't recline forward, suspect these are 4 door seats?

1x S13 Factory Grill - $10 - Some broken brackets, swapped out for Nismo style grill.

1x Pair rear camber arms - $20 the pair - Replaced with ISC items for more adjustment.

1x Complete S13 shocks/springs - Best offer/swap - Bushes are half gone in the rears, shocks themselves don't appear to be leaking and were only replaced as I wanted to start tracking the car - Seemed fine on the street. Not expecting much for these and will favour people who can come get them.

Also have heat shields from standard turbo setup (CA18) if someone wants them and I'm considering pulling the aircon so that might be available if someone is keen.

Open to offers/clean swaps if you have'em and I'm also after some stuff so will favour trades/swaps :)

- CA coils in ex condition either awesome factory ones or splitfires/superspark etc no externals.

- Set of 4 semi slicks, used is fine. 235/45 or 235/40 R17

- Shift Light, single or dual stage.

- Rear strut brace for S13

- 4 point harness.

I'm after coils and semi's in particular.

Can throw in some extra cash your way depending on what you have and how much I want for it but I'm looking for fairly clean swaps so if you have mega expensive items then prolly not worth offering it :down:

Pics of any of this stuff can be arranged as necessary.

[email protected] 0427 928 304, or PM for any questions.

  • 2 weeks later...
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...