Jump to content
SAU Community

Recommended Posts

Hey guys. Does anyone know any where in Brisbane that may purchase a R32 GTR? I have a R32 GTR I need gone.. like in a week or 2 minimum. I'm about to start calling import dealers around Brisbane to see what I can get. The car will be sold for the best offer. I'm guessing I won't get much more then 11 or 12k (paid 20k) from a dealer so just putting it out there that mine is going cheap if anyone wants to come see it and make a offer.

This is a serious sale. No stuffing around I don't have time for that.

Located Brisbane north side

mob 0431 036 784 (If i don't answer leave a message and ill call you back for a inspection asap)

Link to comment
https://www.sau.com.au/forums/topic/310076-r32-gtr/
Share on other sites

you might wana put it up on the for sale subsection within the queensland section. put some some pictures and details and you might be able to sell it within that time frame for a better price than what a dealer will offer you, remeber they are importers, they can get cars for dirt cheap so they dont really have an incentive to buy yours unless your trading it in,

but yeh advertise it here and see how it goes.

cheers

Link to comment
https://www.sau.com.au/forums/topic/310076-r32-gtr/#findComment-5109738
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just had this happen to me too.  R32 GTR.   Also broke "just before going out onto the track" - someone up there is looking out for us... Very scary since I was about to do a narrow street course with zero run-off and curbs everywhere. Many people on here upgrading to billet uprights and R35 bearings?   Or buying new OEM knuckles?  I am not keen to replace with another s/h 30 year old fatigued part.
    • Top off with distilled water and see what happens. If you keep losing coolant then you know to start looking.
    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
×
×
  • Create New...