Jump to content
SAU Community

Recommended Posts

Whats it supose to do???

edit

just done a search and hummmmmmm ok then if that can do half of what it says than im a china man

better off getting a neo or a safc or better still

Is there not anywhere in Australia that do generic stage one ECU remaps on an exchange basis?????

Edited by jjskyline79

HI all after hours apoun hours of research and pulling the ecu apart the item is a early version powermod piggy back system. After speaking to powermood.com.au i found there service to be excellent with them even sending me the wiring diagram and fitting instructions to the rb25det. well done to them it hard to find this level of help in an item bought off ebay in which they have no responsiblty for what so ever.

well installed the unit today. hmmmm... Car 1 me 0 installed it all and wont fire. ( i did use spade terminals and splicing connectors ) so will be firing up the soldering iron on the week end and have another go at it. Hopefully it was just a splice connection that was not making contact.

do you have someone that can even tune this system?

never heard of it, and i suspect most tuners will say the same thing

its probably more hassles than its worth honestly

i would have left it at that, cut your losses and buy something well known and locally supported

get a nistune
Good advice there. Nistune is readily available for Rrb25.

NOT

Track down a Z32 ECU, Get a Nis-Tune Board... Then off to the Tuner :D

We've done it to atleast 10x cars by now.

Just need the correct ECU No.

My two cents :down:

Edited by JDM_Spirit

There is a fair bit of support for the power mod system and it is the same distance away from were i live to power mod or nistune tuners. I am a sparky by trade and have some knowledge of how wiring should be done so i would rather just give it another go.

OK round 2 still didnt start but the bloke from powermood said to just run the powermod with out the input /output of the 120 degree senor ( this still just plugs into the normal ecu ). After that it runs so my question is what does the 120 degree sensor do ( i still have the 1 degree sensor inputted into the power mod ) Note this only required to be spliced into not cut .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...