Jump to content
SAU Community

Which Springs Are Softer Whiteline Or King Spring?

Harey
 Share

Recommended Posts

Harey Veteran

Harey

Posted
Posted

Hi All,

As the topic suggests which springs are softer (ie nicer for the street) on a 33 or 34 skyline:

Whiteline rear springs part number 73176

King Springs rear part number KDRL-61SP

If anyone has the spring rates that would be fantastic.

I want the softest good suspension for a 350mm wheel to arch height on the rear of my R34 GT-T.

Harey Veteran

Harey

Posted
  • Author
Posted

Ok I rang up king springs, the said the springs are progressive rate from 135-180 lb/inch. That sounds excellent, right on Sydney Kids recommendation!

I rang up whiteline (they said hello red ranger) and they said they dont sell springs anymore. wtf

Harey Veteran

Harey

Posted
  • Author
Posted
King springs are terrible ( well in my experience ) they ride like shit super hard/ stiff, no variable rate either.

Lovells springs are great, and i dont mind Universal.

Hmmm thats interesting, what king springs have you tried? These have the softest spring rate of all the springs on offer. They are progressive rate too 135-180 lb/inch. Whereas the whiteline springs are 165lb/inch but they are constant.

Also what shocks were you using with the king springs as that makes a massive diffference of how they perform.

FineLine Grand Master

FineLine

Posted
Posted

King springs havnt had the best rep over the years but they are gritty people. They have developed their product to the point where they are one of the few spring makers in the world who guarantee their springs not to sag.

As for ride softness. they and most spring makers will make springs as soft or as hard as you like.

It isnt the brand that makes them hard or soft. Its the spring rate.

I am currently using the king springs on bilstein shocks and couldnt be happier.

  • Nope 1
gslrallysport Experienced

gslrallysport

Posted
Posted
shocks generally kyb or standard

And there's your problem......

Only people who don't have shocks capable of controlling decent springs will bitch about Kings. Kings are some of the best springs on the planet. There's a reason why they're the largest spring manufacturer in the southern hemisphere, supplier to race teams all over the world including those in Europe where the likes of Eibach or Koni are ALOT closer, and OEM supplier to Australia's two ultra-premium coilover manufacturers that export race and rally suspension to the world (DMS and MCA).

Also FWIW I'm pretty sure Whiteline springs were rolled by Lovells...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DatsunBanana
      Rear subframe stay bracket bolt removal issues

      By DatsunBanana · Posted

      I didn't know about induction heaters but checked them out and they look awesome but too pricey for the occasional job like this. And I'm too nervous to take a flame anywhere near there as the petrol tank is so close, although I was intrigued with the crayons suggestion 😁 I filled a coke bottle lid with penetrating fluid and raised it on the jack so the nut was submerged in it all night. Then went in with a tiny cold chisel and got it almost to the point of splitting but not quite (I didn't want to damage the bolt threads). Then I hammered a socket back on and gently worked it until I felt movement. And it's off 😀
    • GTSBoy
      RB25DET Series 1 & Series 2 Gearbox Identification

      By GTSBoy · Posted

      I should. But it already uses too much fuel for a daily. You might note my recco for engine chnages are almost exclusively to people who have it as a weekender/summer car. I don't even have room to keep the spares for this one, let alone another car.
    • MBS206
      RB25DET Series 1 & Series 2 Gearbox Identification

      By MBS206 · Posted

      He should do an LS7 too...
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      If I had "perfect R33 GTR" kinda money I would have bought one of the crazy expensive low mileage HJA cars, but I am sadly not that wealthy. I already picked this car out of various Skylines for sale locally, most of which were worse in some way. Only a few cars were actually better but also more expensive. In terms of buying a motor locally, I at least have the option to inspect it myself and juding the seller as a person, and used or freshly rebuilt engines that some people sell are actually ok price-wise. I knew the car was going to require work, but shit piled up real fast and I haven't even driven 1000km yet as the turbo started oiling like a bitch within a few weeks after I got the car.   I assume it wasn't actually me who cracked it, though there is no way to know when that crack formed and if the previous owner even knew it was there. Buying another 05U Block can be a gamble, yeah, but the cheapest PRP cast block is like twice or more money-wise, and billet is 3 or 3 times as much. For now I am most likely just keeping the current engine, as a rebuild or engine swap isn't happening right now. But I am seriously considering buying a second engine and selling mine in return. Might be a sweet deal at the end.
    • sunsetR33
      RB26 turbo oil banjo bolts

      By sunsetR33 · Posted

      Hi all. I need some help buying the correct size banjo bolts for my 2860 turbos. Because whoever installed them tore up the original part, I ordered new ones of this kind, because I just figured these were the most leak-resistant option as I already had trouble with a shitty braided line. I need to know the thread size of the smaller left hole, that is the turbo oil feed connection. I found out so far that the turbo oil inlet apparently has a 7/16"-24 thread, but I cannot find any listing or description of the thread size on this line. I do not have the original bolts. I tried using the bolts that were in the turbos (the ones that were mounted with the shitty braided line) but they sit very loosely so they can't be the right thread. Means either these bolts are the wrong ones (how do they fit the turbo then? no clue) or the wraparound-lines have a different thread than the turbo oil feed itself. Help is appreciated, asking Nissan directly is obviously not going to work.
×
×
  • Create New...