Jump to content
SAU Community

Recommended Posts

Do you have a mechanic friend?

Do you have a panelbeater friend?

If so, make a list for each of you to check the car over.

If you have an older dude 'er dad to haggle for you after all the above ^^^ comes up trumps, see what the best price is - and haggle some more.

You might only need $100 to pay a deposit and get a receipt.

Then get details of the VIN/Chassis Number + Engine Number off the Rego & check that the Rego is in the name of the person who says he owns the car.

Then physically check on the car itself if those 2X numbers correspond.

You have to supply your Driver's Lic # to him.

Take the VIN/Chassis # + Engine # + Rego # and cross-check with REVS (Register of Encumbered VehicleS) in your state.

and get it inspected by someone that you trust at a WORKSHOP!! dont just get someone like RAC to come out to the vehicle.

i cant stress this enough. i almost bought a car which had a fair bit of body and chassis done to it, which i wouldnt have known about without getting it checked at a workshop.

Also it's a great idea to get a contract drawn up and signed by the seller saying that there are no outstanding defects or finance owing on the vehicle. I know a couple of people who have been stung a month or two after purchase with carry over defect notices. And it's your problem not the previous owner. The RTA or VicRoads etc don't care who owns the car. You can sell it 3 times over and they will track it down.

fark me you guys are rough..

i wouldnt bother selling a car to any of you based on the fat waste of my time and the insult to my car.

dont haggle.. its a pain in the arse.., make an offer... but dont haggle. if the car is good, then its good.. if its worth what the owner is asking, then pay it, dont haggle, it makes you look cheap. dont umm and uhh... you either want the car, or you dont.. you either have the cach, or you dont. unless there is one car asking x amount when all the other models are cheaper than x amount.

think about it this way... if you make a ridiculous offer and say thats all youve got, and you get denied, then you might miss out on the car, which you obviously have an interest it, or you will look like an idiot when you ring up the next day and offer more, after youve said thats all you had. for the seller... worst case is hes still got the car.. maybe he missed out on the cash.. but hes still got the car... you dont.. you missed out.

dont rock up at a car and look at it, and then go find out if you can get the money.. Know you can get the money before you even start looking.

and take the correct money... ive had an idiot who was coming to buy a bike off me... id advertised it for 3800, but told this guy he could have it for 3500... he said he wanted it, drove 4 hours down from coffs to come and check it out, but oh my... he only brought $3000 with him... and expected i would just take that.. i told him to come back when he had the extra $500..

i have owned 16 cars over my 10 years of having my licence... all of those have been excellent examples, and most of them have been a once only look.. i narrow my search down via the internet.. and then basically pick one based on colour, mods and location.. rock up with the cash and expect to drive the car home that day.

having said that, i am a mechanic, with a bit of body knowledge.. ive only not been satisfied with 2 cars ive ever looked at.. but my mentality is that there is nothing that cant be fixed.. little things can be tidied up, its not worth the risk of losing an overall good tidy car because it has a paint chip or something... getting the car is worth more to me than a few repairs that id probably change later anyway. every car i buy comes with a 5 year build plan, which includes a turbo, engine and gearbox rebuild.. though i get bored and want to change a year later.

if it has damage that you werent aware of... by all means, haggle the price of the repairs.. but dont discount the repairs, as this could lead to a better overall car..

i once looked at a my02 rex, had a bit of hail damage on the bonnet, none on the roof, i wouldve just fitted a c/f bonnet but old mate would not drop his price of $24000 which was way overpriced compared to others. ended up getting a mint example for $21000.

buyers look you guys are stating is insulting to alot of car owners.. its sad that alot of sellers are reasonably dishonest, but you can generally pick this up from the person selling it and their demeanor.

ive knocked away a heap of buyers over the years with offers when they know full well that what im selling is a pristine example.. i will not haggle, i will flat out refuse you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...