Jump to content
SAU Community

Recommended Posts

hey guys my skyline is still for sale i really need it gone as im going overseas in 2 months

its a ECR33 GTST 1994

paint = ok

interior = good

engine = excelent

recent work including upgraded turbo Garrett T3076 R Apex PowerFC with Apex PowerFC boost controller 225rwkw

at 12 Psi boost have dyno sheet if needed all work done by Autotech in hume

im asking 10,000 ONO i really need this gone guys id love for this car to stay in canberra si i can see my much loved joy driving around

my number is 0402 708 957 Please no time wasters only people that are interested i really need this gone

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/311400-quick-sale-needed/
Share on other sites

Have taken this car for a quick spin while I was looking for a replacement for my first skyline, do rate. Nice tone, easy to drive, and definitely has balls. Can't comment too much as it was only down the road and back, but definitely won't disappoint! Bloody good price too, such a shame! Good luck mate.

Have taken this car for a quick spin while I was looking for a replacement for my first skyline, do rate. Nice tone, easy to drive, and definitely has balls. Can't comment too much as it was only down the road and back, but definitely won't disappoint! Bloody good price too, such a shame! Good luck mate.

Cheers for the kind words mate and is such a shame i will def cry when i see this baby go

  • 2 weeks later...
  • 2 weeks later...

BUMP i really need this gone please guys i dont want this still here when i leave as i hate doing logistics at long distance

if you know anyone that wants a fantastic car that is quick, reliable with all the work done for really cheap please let them know and call me on 0402 708 957

thanks

Ross

^^^ unfortunately no sorry mate that's the prob its tuned with the Power FC for all the power and upgrades iv done then

BUMP!!!!!!!!!! please i need this gone guys !!

Edited by rossco_01

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You don't need to drain the intake heat exchanger to remove the radiator but depending on your plans you may need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...