Jump to content
SAU Community

Recommended Posts

ok so gonna do another photo shoot,

friday 19th march around 10.30 pm

will let you know where we will meet up at 1st, probably have a few different places.

looking under narrows bridge.

please feel free to byo camera and take photos as well,

if you have 31-34 4door (r31 please look nice!) but if u have GTR from the years 2000 and up be my guest :P

Link to comment
https://www.sau.com.au/forums/topic/311591-photo-shoot-friday-19th-march/
Share on other sites

yea stagea sounds good,

i tink ill change it to just skylines / stagea,

when parking try to park in groups to cars,

and is anyone intersted to doing a map maybe? and go to points to points? maybe a undergrownd car park, say garbos..

meet under narrows bridge, at 10.30 startin shooting at 10.15, please dont park under the bridge there is a car park next to it

Meet at 10.30 but start shooting at 10.15...?

sorry mate are u wanting 4 Door's only?

lol sorry i mean 1030 for a 1045 shoot! my bad.

and um under narrows near mill point yeah, there is car park on the other side

350z is fine and r31 is fine and ur c210 is fine too.. dnt be offended if you get asked to stay out for a few shots, but i will do singles and all that

thanks all for coming! was heaps fun.

was a few cameras out and about, be good to see what else was taken.

just a few photos, im puttin them on a flickr account so then ppl can get them as they wnt.

http://www.flickr.com/photos/48541315@N05/...57623654877260/

24785_10150167084595161_801230160_11528755_1525961_n.jpg

24785_10150167084720161_801230160_11528760_5758593_n.jpg

24785_10150167084990161_801230160_11528774_8005530_n.jpg

24785_10150167084110161_801230160_11528726_6866040_n.jpg

24785_10150167084185161_801230160_11528731_4541732_n.jpg

24785_10150167084665161_801230160_11528758_7492787_n.jpg

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...