Jump to content
SAU Community

Help Me Make My R33 Flutter :)

Alexxs

By Alexxs,
in General Maintenance

 Share

Recommended Posts

Samon Proficient

Samon

Posted
Posted
go on google, you will find it, esspecially on vl turbo forums..

but the easiest way to do it. is unbolt your blow off valve, get that gasket and trace it onto a drink can then cut it out, then bolt up your blow off valve back to how it was.. only put that small bit of tin between the gasket and the blow off valve.. thats the way i done it, and occasioanly when i get bored i change it around.

An even easier way:

Grab a standard plastic bottle top... i.e. off a coke bottle or whatever. Take the plumback hose off the BOV, push the bottle top down the hose a little, and put it back on. It can't go any further down, as it'll hit the solid plumback line, but it will just block it off nicely. You can even drill a hole in the middle if you want to reduce the flutter a bit without killing it completely...

I did this on my 33 a while back... got sick of the hektik flutterz after a while so I took it out... I found I got about another 1-2PSI extra as the bleed hole wasn't... well... bleeding :cheers:

**RB2530** Proficient

**RB2530**

Posted
Posted
hahaha the mirror was a nice touch.

so let me get this straight. your approach is similar to the playing card in the bmx spokes?

patent that mthrfkr!!

Patent already pending my friend...

A vent to atmosphere variant of this model is also available...Main difference is you use a tyre tube and a nail.

1. Pump a tyre tube and mount it under you bonnet somewhere..fake carbon fibre brackets are available...

2. Mount the hinge and nail next tyre tube. Back off throttle, nail into tyre tube and phtssshhhhh!!!

Highway patrol pull you over...

"Son you have a vent to atmosphere BOV!! -They are illegal!!"

"No I dont officer... It's one of RB2530s new patented 'Legal' riceomatic pseudo BOVs....." "They ARE legal, I''l be on my way thanks"...

:cheers:

  • 3 years later...
MrRx7s3 Mentor

MrRx7s3

Posted
Posted

go on google, you will find it, esspecially on vl turbo forums..

but the easiest way to do it. is unbolt your blow off valve, get that gasket and trace it onto a drink can then cut it out, then bolt up your blow off valve back to how it was.. only put that small bit of tin between the gasket and the blow off valve.. thats the way i done it, and occasioanly when i get bored i change it around.

Thats exactly how I've done it except with a solo can :D haha lol, around 10000kms later it still works great, and no stalling issues either.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sinn3r
      R34 Skyline climate control unit transistor

      By sinn3r · Posted

      You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Marek
      Hi everyone.

      By Marek · Posted

      Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...