Jump to content
SAU Community

Recommended Posts

Hey guys looking for an Engine

Rb25de Neo .

Need if ASAP

currently my car is sitting at home with no engine.

here's my Email: [email protected]

if u can provide any information please do

Thank you in advance :blush:

Link to comment
https://www.sau.com.au/forums/topic/311722-help-need-rb25de-neo-asap/
Share on other sites

I have a complete one of these in my garage including all ancillary, loom, ECU.

i was looking for one at a wreckers in Deer Park.

Cheers BTW

Add me on MSN might invite u to our Cruses..

hi there

i got RB25det Neo lying around in my place. its in canberra.

complete engine minus looms, fuel rail, CAS & coilpacks. after around 1500.

PM me or text 0420905342 if u keen.

thanks.

sarumatix if payed enought attention before commenting and making a tool of yourself, u wouldv realised the wreckers wanted $1200+ for an rb25de neo motor. Putraged over here offered to sell him an rb25deT (emphasis on the "T") neo motor for $1500. thats an absolute bargain, seeing how the non neo rb25det's go for that price.

sarumatix if payed enought attention before commenting and making a tool of yourself, u wouldv realised the wreckers wanted $1200+ for an rb25de neo motor. Putraged over here offered to sell him an rb25deT (emphasis on the "T") neo motor for $1500. thats an absolute bargain, seeing how the non neo rb25det's go for that price.

not bad but it's missing few things and im pretty sure the looms are different from de/det, det has a few more plugs so you will have fun installing another loom

Edited by bti_jet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
×
×
  • Create New...