Jump to content
SAU Community

Recommended Posts

I am selling my ride and I am deciding to remove most of the parts. I think its easier to sell of a stock car rather than selling it the whole package.

Engine Block $3800.00

RB25DET w/Bored and Coated Block

RB26DETT Crankshaft

87mm WISECO Pistons

CROWER Conrods

ARP Headstuds

COSWORTH Main and Rod Bearings

COMETIC 1.5mm MLS

(I will include a RB26DETT bare block which I purchased just for its crankshaft)

Cyl. Head $3800.00

RB25DET Ported and Polished Cyl. Head

TOMEI PROcams 260 Degree w/10.25mm Lift (Intake)

TOMEI PROcams 260 Degree w/10.25mm Lift (Exhaust)

TOMEI Type B Valve Springs

TOMEI Forged Solid Lifters Conversion

TOMEI Shims

TOMEI Cam Pulleys (In&Ex)

*(I will also include a bare RB26DETT cyl. head, stock pulleys, cam covers, stock valves, springs, retainers and lifters)

Engine Externals $3500.00

RB26DETT Individual Throttles & Plenum

GARRETT GT35R .86 Turbo w/Ported Shroud and Polished Housing (3 months old) (I had to purchase a new turbo to rebuild my turbo. My previous turbo had bearings issue)

TIAL 44mm Wastegate

GREDDY Timing Belt

JUN Oil Pump

HKS Downpipe

SARD 800cc Fuel Injectors

NISMO Fuel Regulator

SARD Thermostat

SARD DENSO Iridium Spark Plugs

Q45 AFM

Greddy Type R Blow Off w/Uprated Springs

WALBRO Fuel Pump

HKS Oil Cooler

HKS Intercooler

BLITZ SUS Power Air Filter

OGURA RACING Twin Plate Clutch

All items are purchased new. If somebody would take the whole lot I would let go everything for $10,000.00 with Power FC and controller. This motor made 444whp at 1.5bar on a DD Dyno. Motor can still be push way more but I would prefer a stable and a healthy motor. Revs at a healthy 9000rpm. I had this motor running for 4-5 months now. Probably made around 2000km on clock including running in. Weekend drives only.

I have other external parts which I am letting go as well.

Exterior

JUN Front Bar

JUN Rear Bar

JUN Side Skirts

JUN Rear Spoiler

TEIN FLEX Coilovers $1400.00

TANABE Strut Tower $250.00

BBS LM Two Piece Forged Wheels 9J x 9.5J $2500.00 with Michelin Pilot Sport 2

MICHELIN Pilot Sport 2 (275/35/18 , 235/40/18)

ENDLESS CCR Brake Pads

ENDLESS Super Street Brake Pads

ENDLESS Brake Rotors

GANADOR Side Mirrors

VARIS Carbon Hood

NISSAN SII Headlamps

Electronics & Interior

APEXi POWER FC w/Hand Controller $1300.00

HKS EVC 6 Boost Controller $500.00

HKS TYPE 1 Turbo Timer $150.00

DEFI Boost Meter

DEFI Oil Pressure Meter

DEFI Oil Temp Meter

DEFI Water Temp Meter

DEFI Exhaust Temp Meter

DEFI Control Unit

*(Whole lot for $1,200.00)

PIONEER AVH-P6650 Indash DVD

KICKER kX650.4 Amplifier

LANZAR VIBE 435 1600W Amplifier

MTX 8000 Subwoofer

JL AUDIO VR600Si Components

BRIDE PROS Leather Full Bucket Seats

MOMO EVO TME Steering

Pls PM me for details. Genuine sale!

Cheers!

Edited by Tomei_Powered
Link to comment
https://www.sau.com.au/forums/topic/311867-de-mod-sale/
Share on other sites

PM R33,

I am not sure if I would wanna remove my current headlamps atm. I thought of selling it together with the car.

Sorry mate. Will PM you if I am able to find a used headlamps to swap with my current one.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/311867-de-mod-sale/#findComment-5132402
Share on other sites

Engine comes with all supporting parts to run. Eg. p/s pump, a/c comp, pulleys, tensioners, radiator, etc. I am removing the whole running engine with gearbox and swap with a stock RB25 motor on my car. (I will also include the gearbox if I get a really genuine buyer).

PMs replied. Price is slighty negotiable. I am sure purchasing those parts new and building such a engine requires lotsa time, sweat and headaches. So I think thats the best offer I can do, $10,000.00, swap it into your car and you get instant 450whp.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/311867-de-mod-sale/#findComment-5132430
Share on other sites

Head sounds tasty, any vids of idle?

Can you post a few pics of the bonnet?

The Varis hood is just a stock looking hood. It was full carbon I bought used. It was damaged slighty so I repaired and sprayed it black instead.

Link to comment
https://www.sau.com.au/forums/topic/311867-de-mod-sale/#findComment-5132444
Share on other sites

  • 1 month later...

Spewing I wasted money on a tired built 25 and a standard motor to replace that after it'd f'd up this year...

This offer has come 5months late otherwise I wouldve snapped it all up in a second

free bump and good luck with the sale...

Link to comment
https://www.sau.com.au/forums/topic/311867-de-mod-sale/#findComment-5194888
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...