Jump to content
SAU Community

Recommended Posts

It may take several days of everyday driving for the battery to fully recover. My 32 often fails to have enough grunt to start because I might not drive it for more than a week, but then after a couple of days of everyday use, the battery is fine again. And the battery is a couple of years old now.

CARSICK - it doesn't really matter how many volts are available BEFORE startup - and 14V is too many, should only be about 12V - what is important is how many volts and amps are available DURING startup.

A little wrong on that last bit, Voltage does matter, keep in mind theres is a relationship between Volts, Amps and Watts. A deficiency in one will mean the others need adjustment to maintain the same result. So yes, amperage is watt (hah i made a funny) matters, but the others come into play in making that amperage possible.

From experience i can tell you that 14v is not too much. I kept my car in storage for quite some time, and would regularly have issues starting it up if i left it too long.

Being left it wouldnt always catch first go, and if repeat goes dropped the voltage below 12.5 minimum, it wouldnt start up no matter what i did. Leave it 15 mins and try again. No problems.

im pretty much forced to buy a new battery because my mums bf is a moron because he thinks ill stuff up the aurions ecu or something. I had jump started the car at my uncles where i left the car and drove it back here which was a big mistake because my mums bf is a real idiot

It may take several days of everyday driving for the battery to fully recover. My 32 often fails to have enough grunt to start because I might not drive it for more than a week, but then after a couple of days of everyday use, the battery is fine again. And the battery is a couple of years old now.

CARSICK - it doesn't really matter how many volts are available BEFORE startup - and 14V is too many, should only be about 12V - what is important is how many volts and amps are available DURING startup.

if your battery is dying from not being driven for a week then your battery is stuffed. when my mother had an operation on her hand her car went 4 weeks without being driven and started fine. the longest i've had a car sit without being started (and with the battery still connected) was 2 months, and it still started fine.

my family is really stupid when it comes to cars i asked my mum 2 let me jump start my car and my step dad goes no it cant stuff the cars ecu by doing it because it happened to his old patrol and i just didnt even bother arguing with him...

yeah they sound like the typical uneducated (mechanically uneducated) people that have heard from someone who had a mate, who had a mate who heard from a mate that a mate of theirs had their ecu blow when they jumpstarted the car. what they don't realise is that for the ECU to blow you'd have to have a faulty fuse somewhere along the line. i've jumpstarted fuel injected cars dozens of times and never had an issue. i use the following method:

hook up the earth on the running car's battery

hook up the earth on the flat battery

hook up the + on the running car

hook up the + on the flat battery

and then when i'm done i take it off in the reverse order.

I 'think' it may be a case of early ECUs being quite sensitive to spikes and transients that may occur during a jump start...Now they are a very refined bit of kit and their sensitivity has been designed out..

So thats how this story may have started...

loll thats exactly right mad082 it happened to my mums bf's 4wd when he jump started it something along those lines. its funny because he was talking to me awhile back about a racing car his dad had and that he worked on yet he doesnt know anything about jump starting a car.... thats typical wog parents for you lol

i think a lot of people also do it wrong, or disconnect both clamps from the 1 battery at a time and after they take the first one off they hold them together in the 1 hand and they touch and arc out and possibly melt some wiring.

A little wrong on that last bit, Voltage does matter, keep in mind theres is a relationship between Volts, Amps and Watts. A deficiency in one will mean the others need adjustment to maintain the same result. So yes, amperage is watt (hah i made a funny) matters, but the others come into play in making that amperage possible.
Did you READ what I wrote? I said that static voltage before starting is irrelevant, and that available voltage during the start procedure is what counts. Many batteries will show a "full" charge, but cannot start the engine.
From experience i can tell you that 14v is not too much.
A static battery should not have more than 12 and a bit volts. A running engine will show around 14V at the battery because that is what the alternator's regulator is controlling it to. And the reason the voltage is around 14V is so that the chemical reaction that produces the static voltage in the first place actually "runs" in reverse.

mad082, the battery is supporting an alarm, a radio with battery backup, and a clock with battery backup. All these act to drain the available voltage from the battery. (And the battery is a few years old now, admittedly)

Apparently the secret to not blowing things up is to switch the parking lights on before disconnecting jump leads. That way, some of the excess current being generated by the alternator has somewhere to go, other than to the jumping battery, which suddenly "disappears" from the circuit.

Did you READ what I wrote? I said that static voltage before starting is irrelevant, and that available voltage during the start procedure is what counts. Many batteries will show a "full" charge, but cannot start the engine.

A static battery should not have more than 12 and a bit volts. A running engine will show around 14V at the battery because that is what the alternator's regulator is controlling it to. And the reason the voltage is around 14V is so that the chemical reaction that produces the static voltage in the first place actually "runs" in reverse.

mad082, the battery is supporting an alarm, a radio with battery backup, and a clock with battery backup. All these act to drain the available voltage from the battery. (And the battery is a few years old now, admittedly)

Apparently the secret to not blowing things up is to switch the parking lights on before disconnecting jump leads. That way, some of the excess current being generated by the alternator has somewhere to go, other than to the jumping battery, which suddenly "disappears" from the circuit.

still, if the battery is draining by that much in a week then it is time for a new battery. my 33 used to only get driven occasionally and it had all the same setup and it would still easily start after a week or 2. and i had an n14 pulsar with an alarm, stereo, clock, etc and it sat for a few weeks between being driven, and then when it was driven it was only probably only for about 10 mins to the shop and back.

Did you READ what I wrote? I said that static voltage before starting is irrelevant, and that available voltage during the start procedure is what counts. Many batteries will show a "full" charge, but cannot start the engine.

yeah i READ what you wrote, and you wrote an incredibly cut down version of the details, as did i? simple fact of the matter is we're agreeing the principle and knattering over the details, i will admit tho i missed your mention of voltage and only noticed wattage. but chill, i wasnt calling you a dumb ass just correcting a point of yours i though warrented a little more info.

but you are correct, 14v is what is displayed when running, but i'm pretty certain my car wouldnt kick over if it read less than 12.5. Also if i cranked it a few times and it dipped below, it wouldnt start until i left it a little while and the voltage crept up again.

But at the end of the day it seems we agree. Not enough voltage/wattage before cranking will certainly mean not enough during. And with a flattish battery that is what you'll get, shows enough juice to turn on a light or an alarm, but will lack the staying power the crank it over.

With a note on the alarms and backup batteries, its also worth noting that if your alarm is old the backup battery can get knackered and not hold charge, when this happens it puts additional drain on the battery. This can be why one car will start up after 2 weeks of not running and another wont, all things but backup batterys taken as equal.

bought a hi powered century battery today was 169 dollars. had a problem with my positive battery terminal theres that much rust not even wd40 can undo the washer to remove it so i used a screw driver to slide it off the old battery then hit it with the back of the screw driver to sit back on the new battery

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
×
×
  • Create New...