Jump to content
SAU Community

Recommended Posts

Hi guys. Been scanning through old posts but cant seem to find the questions im after.

Im trying to choose between an r32 gtst and an r32 gts4. Obviously the 4wd of the gts4 will be an advantage on the strip etc but does the extra weight make a big difference?

Can anyone tell me the stock 0-100 times of these 2 cars?

Is it possible to get the gts4 into a WRX beater pretty easily? Id be after a 0-100 time of around 5 seconds and 1/4 time of 13s. How hard is this to get?

Are the gearboxs on the 4s the same as the gtrs and if not how strong are they?

Any answers appreciated.

Tom

Link to comment
https://www.sau.com.au/forums/topic/31209-quick-newbie-question/
Share on other sites

Anyone?

both cars in stock form - the gtst is faster as it is i think 100kg lighter.

BUT that is if they are both stock.

I can keep up with a 12sec rex up to about 85kmph, after that its gone tho.

im preety sure the gtr box is a bit stronger???

but the gts4 box is still a strong one.

gts4 is quite amazing from the lights.. i usually take off at 6500rpm and ride the clutch a little... it chirps a bit but that is all.

The GTS-4 has the same box as a GTR. A popular mod is to do an RB26DETT conversion, with which you will end up with pretty much a GTR but with skinny guards (think sleeper). It's pretty costly though, so if money is a concern an RB25DET conversion might be better.

The GTST or GTS-4 is obviously heavier, but the drive-line is extremely strong. Buy a Rex and you will destroy clutches and gearboxes faster than you would ever believe possible, if you drive it hard. The Skylines are indestructible, and take some serious mods without becoming unreliable.

The GTS-4 gearbox used with the RB20 has different ratios, but is otherwise identical to a GTR box, and is just as strong. Same with the diffs.

i had a rolling start drag with a new STI the other day in my R33 and i was pulling away from it, WRX's arnt that quick after they launch imho

Depends what's been done to them (like any car i guess)

But it is my 2nd fav car to chop, after the commonwhore that is of course :headshot:

sorry to hi-jack the thread a little, but i'm in the process of bringing an R32 GTS4 over from japan (read getting the money together :Oops: )

but will be performing the RB25DET swap over on it (along with a decent level of modifications), anyway, my question is will the RB20DET g'box bolt up to the RB25DET block easily or is there some work that needs to be done?

thanks

Shane

Hi Shane, the issue here is the 4wd sump is different (wider) to carry the front diff and drive shafts. The 4wd block is therefore a different casting to allow the sump to bolt up. Basically you can't use a 2wd block and expect the 4wd sump to bolts up. There are 4wd blocks in RB20, RB25 and RB26 and 2wd blocks in RB20, RB25 and RB30.

So if you want to put an RB25 into a GTS4 then you have to use a 4wd RB25DET out of a Stagea. Not that common. Or get an RB25DE (non turbo) 4wd block out of a R33 GTS4 and swap the internals from a 2wd RB25DET.

That's why the common upgrade for a GTS4 is an RB26DETT, it's more expensive but much simpler.

Hope that helps

Sydneykid, thanks for that info, damn i always thought the R33 GTS4 was turbo'd, oh well.

i was going to get the internals re-build anyway so the 33 block may be the way to go (balanced/shot peened crank and rods, forged pistons etc etc)

the only other option i can see is to have a custom sump made up but have it modeled off the original 4WD RB20 one. that way a few baffles could be put in, stop the oil surging at the track :(

Shane

Sydneykid, thanks for that info, damn i always thought the R33 GTS4 was turbo'd, oh well.

Yeah, i read somewhere ( probably a thread here :( ) that Nissan didn't make a turbo'd R33 GTS4 because they thought people might buy it instead of a GTR and they did want the cars to be that similar?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
×
×
  • Create New...