Jump to content
SAU Community

Recommended Posts

hey guys, yes yet another post from me :P took the new R33 in for a service by a mechanic to ensure he couldn't spot anything major out of place that dad may have missed (ex mechanic- never worked on forced induction machines though) upon buying the car, talked to the mechanic and he gave me a list of things he found whilst poking around

4 new rotors (knew this one when buying the car)

3 new tyres (knew this one when buying the car)

high pressure radiator hose leak

power steering leak

Rocker cover gasket leak

radiator needs new front bushes

radiator needs a good flush

besides that he said the car was pretty straight and most of the work was due to age, not to it being flogged everywhere it went, any opinions on any of the work it needs and how much i could be expecting for some of it (he told me he didn't want to give me a quote because he doesn't know the RB parts price list very well and didn't want to lead me in the wrong direction once i take the car in to do the RWC to get the work done).. lol he also told me to hurry the f**k up and strap a powerFc to it so it could get some tuning done but thats a adventure for another day!

also how much would you expect to pay for Oil change, oil filter, fuel filter, platinum sparks and a radiator cap from a local mechanic, still feeling like the service itself was extremely cheap (although i did prepare myself for the worst having heard some of the turbo servicing stories out their)

cheers guys

4 rotors & 3 tyres you'll just have to buy, maybe your dad can still get trade discounts?

Radiator hose leak is possibly as simple as tightening/replacing a clamp, worst case maybe replacing a hose... Depends where it is?

P/S same deal, could be a hose clamp, perished hose or gasket from pump area. Hose, tighten/replace, pump gasket, pull line/housing off, buy some gasket paper & reseal... If its rack you may need to get it looked at or replaced.

Rocker covers are only held in with screws so piss-easy to work with. You may get away with cleaning the rubber gaskets, cleaning the head & re-using them or buy replacements from Bursons, etc... For now just try tightening the screws a touch.

Radiator bushes, ring Nissan spare parts & get a price. Only have to remove the two brackets supporting the top of the radiator (1 bolt each), lift radiator just a bit (or get someone to do that for you) with hoses still attached, while you're under the car. Should get enough movement to slip old ones out & new ones in. Very easy! May even be able to get good second-hand ones (R34?) if Nissan prices are stupid. Mine are fine & car is an 89'...

Radiator flush is maybe a little hard, especially if you are not overly confident, as you want to remove (& maybe replace) thermostat to do the job properly & then ensure it is bled correctly when refilling coolant. I would suggest going to a proper radiator shop & getting system reverse-flushed.

This is a high-pressure flush in the opposite direction to which the water normally flows & cleans all heater hoses, etc...

However I have to say that is the only thing I would suggest you pay for. All the rest is simple enough & if you have a crack now & find you can do it you will save THOUSANDS in service fees down the track. If you are unsure of anything use the search function or post up more topics.

I know most people on here would do their own servicing & would normally be able to help you with anything you're unsure about.

Anyway, as for the service, roughly what did you pay? Would expect if he was using good synthetic oil & good quality parts you may have paid $350-$400... But that's from a mechanics point of view, have never paid for a service! lol

If your old man is an ex-mechanic you should have him doing it or at least teaching you so you can save money in the future...

All the stuff you have mentioned is dead-easy to do yourself once you have a crack at it & would assume you have a tool or two lying around the house.

As a side-note, I would suggest just using copper plugs, especially when/if you learn to change them yourself.

Fair enough not wanting to pay a mechanic to do them every 5-10000 kms but once you change them yourself iridiums, etc are not worth the extra $100

Good luck with it all!

Edited by wlspn

http://www.nulon.com.au/products/Radiator_Flush_and_Clean/

You can down load a manual off the net which tells you how to flush the system, the file is to big to post.

Get your dad to show you how to fix everything else.

PM me if you cannot find it and Ill try and help.

See you around, Enjoy

4 rotors & 3 tyres you'll just have to buy, maybe your dad can still get trade discounts?

Radiator hose leak is possibly as simple as tightening/replacing a clamp, worst case maybe replacing a hose... Depends where it is?

P/S same deal, could be a hose clamp, perished hose or gasket from pump area. Hose, tighten/replace, pump gasket, pull line/housing off, buy some gasket paper & reseal... If its rack you may need to get it looked at or replaced.

Rocker covers are only held in with screws so piss-easy to work with. You may get away with cleaning the rubber gaskets, cleaning the head & re-using them or buy replacements from Bursons, etc... For now just try tightening the screws a touch.

Radiator bushes, ring Nissan spare parts & get a price. Only have to remove the two brackets supporting the top of the radiator (1 bolt each), lift radiator just a bit (or get someone to do that for you) with hoses still attached, while you're under the car. Should get enough movement to slip old ones out & new ones in. Very easy! May even be able to get good second-hand ones (R34?) if Nissan prices are stupid. Mine are fine & car is an 89'...

Radiator flush is maybe a little hard, especially if you are not overly confident, as you want to remove (& maybe replace) thermostat to do the job properly & then ensure it is bled correctly when refilling coolant. I would suggest going to a proper radiator shop & getting system reverse-flushed.

This is a high-pressure flush in the opposite direction to which the water normally flows & cleans all heater hoses, etc...

However I have to say that is the only thing I would suggest you pay for. All the rest is simple enough & if you have a crack now & find you can do it you will save THOUSANDS in service fees down the track. If you are unsure of anything use the search function or post up more topics.

I know most people on here would do their own servicing & would normally be able to help you with anything you're unsure about.

Anyway, as for the service, roughly what did you pay? Would expect if he was using good synthetic oil & good quality parts you may have paid $350-$400... But that's from a mechanics point of view, have never paid for a service! lol

If your old man is an ex-mechanic you should have him doing it or at least teaching you so you can save money in the future...

All the stuff you have mentioned is dead-easy to do yourself once you have a crack at it & would assume you have a tool or two lying around the house.

As a side-note, I would suggest just using copper plugs, especially when/if you learn to change them yourself.

Fair enough not wanting to pay a mechanic to do them every 5-10000 kms but once you change them yourself iridiums, etc are not worth the extra $100

Good luck with it all!

cheers heaps mate, yea ill probably be buying the rotors from the dba bulk buy this month! nah dad won't have any trade discounts (he was a mechanic back in Brazil during the VW era :D possibly explains his golf :D)

definitely going to do most of the work with dad, he will get a buzz out of it all anyway :( yea id searched most of the stuff and nothing seemed to be mind blowingly hard (essentially just seals and hoses) probably won't go through the radiator flush as bleeding it will probably be a bitch :(

well he replaced the sparks with platinums, nulon oil, oil filter, fuel filter, radiator cap and the check over for $150 which i found to be great value (probably would have payed that to have the same service done on the old rolla from my old mechanic) guys are legit and really friendly to!

http://www.nulon.com.au/products/Radiator_Flush_and_Clean/

You can down load a manual off the net which tells you how to flush the system, the file is to big to post.

Get your dad to show you how to fix everything else.

PM me if you cannot find it and Ill try and help.

See you around, Enjoy

cheers mate ill give it a read over at work tomorrow!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yep, its been down for a while, as I understand it it will be back soon.
    • Yeah I also looked at Plazmaman, but, it ended up alot  cheaper getting black ones through EFI when you also added in the delivery cost
×
×
  • Create New...