Jump to content
SAU Community

Recommended Posts

Item Summary: R32 Gtr, Fored, Single Turbo, $24,000 Quick sale!

Item: 1989 R32 GTR

Location: Rockhampton, QLD

Item Condition: small paint chip above front right hand wheel arch from -offset rims, other then that the paint is great, small rubber gromets in boot where spoiler was removed.

Price and Payment Conditions: $24,000 with road worthy

Please note I'm not after any swaps thanks. Just needs to sell.

Info:

Engine:

CP Forged Pistons 86.5mm and rings

HKS 264' in\ex cams

Adjustable cam gears

High flowed ported and polished head

Stainless steel multilayered head gasket

R33 reman crank (larger oil galleries)

Eagle Rods

ARP main studs

ARP enlarged head studs

N1 oil pump

N1 water pump

Tomei oil restrictor

Block crack tested, honed and decked

ACL race bearings

New Gates Timing belt and genuine idler and tensioner

Gates radiator hoses

APEXI Power FC w/ hand controller

Delphi 1000cc injectors/ new o-rings

Super Direct ignition coils(red)

New 90A alternator

Braided enlarged fuel lines

NISMO Fuel pump

NISMO fuel reg

Brand new genuine CAS ($1200)

Custom alloy catch can with twin breathers- -18 Earls fittings and braided line

Twin RB25 AFM with new mushroom pods

Heater hoses, fuel filter, oil filter and oil have just been changed.

Turbo and pipes

Holset Hx35x turbo with antisurge ports (done 10 000km's)

HKS 55mm Wastegate (modified to be adjustable)

HKS power intake pipe

HKS low rise manifold

HKS pipework and intercooler

3 inch fujitsubo exhaust system

Brakes/Suspension/Driveline

HKS Hypermax 2 coilovers and springs(excel condition)

CUSCO rear stabiliser

Project D front upper adjustable camber arms

25mm Aluminium spaces and new bushes on front

5mm spacers on rear

R34 Brembo Callipers with recent overhaul

New 330mm Rotors and pads front

R34 master cyl with CUSCO brake stopper

Rear brakes standard but slotted

OS Giken Triple plate clutch and fly wheel, rebuilt by NPC as a twin plate to hold 600Hp atw. (rebuilt 10 000km's ago at a cost of $1100)

Brand new genuine Nissan Clutch slave cylinder

New nissan spigot bush

New nissan rear main oil seal

New nissan throwout bearing

NISMO Strong Release Fork Pivot (30% stronger)

Redline Lightweight shockproof g/box oil

Kazz 2way Diff (New 'solid' type) done 5000km's

Kazz diff oil

new gaskets, pinion seal, axle seals, and bearings

new CV boots

Interior

Saftey 21 5pt Roll cage(Engineered) (Car therefore registered as 2 seater but this can be changed with removal of cage)

Recaro Drivers Seat w/ bride rail (Engineered)

OPM 90mm dish suede steering wheel with momo button and boss kit

Mines 320km speedo

oil temp, water temp, oil pressure, air/fuel ratio gauge on passanger side dash

autometer carbon series boost gauge in drivers side air duct

Pioneer head unit

Pioneer 6" speakers in rear, standard in front

Old school turbo timer, 30sec increments

Drift button on handbrake

Greddy gear know and leather boot

4wd/2wd switch on dash

Exterior

Ganador mirrors (electric)

N1 headlights

N1 Rear pods

Vertex Sideskirts

N1 front air ducts

Jap Spec clear indicators

8500K Hid Kit

White led number plate bulbs

Wheels:

Rear- 235/45/R17 Work Manaray's. 9.5" wide with +10 offset

Front- 235/45/R17 Sparco Racing Rims. 8.5" wide with +30 offset (25mm spacers take it back to +5 offset)

Gt Radial Tyres

Extra info

- The car is modplated for the roll cage, 2 seat conversion, brake upgrade, and seats

-Serviced every 3000km's

- 129 xxx on the odometer

-Car has be featured in HPI magazine issues 108.

IMG_53651.jpg

- Tuned at Godzilla Motorsports on the 25/6/2009 by Mark Jacobsen

- Car is currently making 370hp at all 4's on 16psi

and run a flat 12.00sec 1/4mile at 111mph

motor and turbo are built to handle much more boost then this however at the time 16psi was what i wanted it tuned to to suit my needs of daily driving and even a flat 12sec isnt to shabby for a street car. ;)

with simply a retune you would easily see 400hp+ at all 4's and break into the 11sec bracket

This gtr is truly awesome to drive.

Pictures: Below

Contact Details: PM on here, or ring my mobile 0439666827

P1010119.jpg

P1010117-1.jpg

P1010125.jpg

P1010120.jpg

P1010116.jpg

P1010128.jpg

P1020197-1.jpg

090801_143018.jpg

091112_171636.jpg

090421_164240.jpg

P1010327.jpg

P1010332.jpg

Benaraby28-8-09246.jpg

Benaraby28-8-09292.jpg

Link to comment
https://www.sau.com.au/forums/topic/312738-r32-gtr/
Share on other sites

This used to be my old GTR.

Was a fantastic and reliable GTR when I owned it, and has continued to stay just as tidy in Zach's possession. Good job dude. Good luck with the sale.

If you want to go get some decent pics one day, I'd love to do it for free. Give me a text or pm on boost and we can work something out.

Link to comment
https://www.sau.com.au/forums/topic/312738-r32-gtr/#findComment-5145461
Share on other sites

Thanks Chris! yeah i was gona get onto you at some stage about getting some decent pics. The ones ive used are a bit blury and don't show how clean and straight the body is. Ill send u a msg sometime and organise it. Zach

Link to comment
https://www.sau.com.au/forums/topic/312738-r32-gtr/#findComment-5145789
Share on other sites

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...