Jump to content
SAU Community

Recommended Posts

Your right, they use numbers for blocks, zones and areas.

For example, my address is: Motoyama Nishimachi "2-2-7-501" Higashinada-ku Kobe.

The "2-2-7-501" equals: Block #2, Building/House #2-7, Apartment #501 (I live in a 7 story building).

There ya go! It makes sense IMO...

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-631716
Share on other sites

In some ways the system does make sense - well, the Japanese postmen (and women) don't seem to have any problems

BUT it seems that in a lot of cases block 6 is nowhere near block 5...

or in my case, I live in house 2640, which is next to 2604 which is next to 2582 I believe! :rofl:

But I do live out in the countryside!

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-631781
Share on other sites

I should add that around where I live you can find little street side maps. They give you details of all the buildings in the area and their numbers, and in most cases the owners/residents surname. Makes finding a house somewhat easier! :rofl:

And most of the major roads do have names/numbers, such as Yamanote Dori, or Route 20, or Bypass...

It's not too bad when you get used to it.

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-631793
Share on other sites

So the equivelent of our Hwy's and FWY's do have names(or route numbers) and when in prefectures it's the number system you mentioned?

I guess once you are use to it it would be handy you could look at the numbers and tell in what general direction you have to head

(assuming there is an order to the number system.. :rofl:

cheers for the Info guys.

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-631930
Share on other sites

I think America has the best Street Naming system, its just numbers.

1st Street

2nd Street

3rd Street

Makes things very easy if you want to get to 22nd street you just keeeeeep driving. I never got lost when I was walking around, but then again thats coz I didn't venture out too far coz I forgot to take my pistol :rofl:

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-631974
Share on other sites

Hi, this is kinda off the topic, but I have heard its really expencive to live in Japan, like everything costs alot of AUD. Is this true? Or was it the case, but now its fine?

I'm sure this was touched on before, on one of the other threads. Can't find it now though, probably a victim of The Great Lost Month...:(

But basically:

BIG CITY = Very Expensive :)

LITTLE CITY = Expensive :(

IN THE MOUNTAINS = Cheap :)

the biggest outlay in Japan is rent. Costs your more in the city. Having said that, I have no idea how that compares to Aus. How much would you pay for a small apartment in Sydney for example?

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-632356
Share on other sites

FCUK!

Then you're gonna have a shock living in Tokyo! According to an online currency calculator 420 bucks AUS is around 35,000 yen! Shit, my mate who lives in the small city near me pays 40,000 yen for a 1 room apartment!!! In tokyo expect to pay around 50,000 to 80,000 yen a month for a similar sized (1 room with dining/kitchen bathroom) and that won't include parking!

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-632406
Share on other sites

Rezz will know more about the costs of rent in big cities, but basically it's looking like Japan is VERY expensive compared to Aus. Don't forget before you can move in you often have to pay several months in advance, plus a months rent as fee to the housing agency, plus another month's as "Key Money" - a mandatory monetary gift to the land owner...:(

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-632410
Share on other sites

In tokyo expect to pay around 50,000 to 80,000 yen a month for a similar sized (1 room with dining/kitchen bathroom) and that won't include parking!

80,000yen = A$979/mth

If you ask me $244/wk ($979/mth) is pretty damn cheap to live in Tokyo City.

To get rent down to $244/wk in Sydney you would have to go 45mins west (:() and that would get you a 4 bedroom house with double lockup garage and small-med backyard.

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-632422
Share on other sites

It certainly seems expensive, but I'm always converting things to British, and rents over there, even in London, aren't too bad! :(

It's certainly a lot cheaper to live outside the main cities. You also have to factor in parking costs - I believe Rezz pays around 15,000 yen a month whereas I don't pay anything living out in the countryside as I do.

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-632429
Share on other sites

Yes guys, shock horror... I pay 120,000 yen a month for a 3 bedroom, 1 bathroom apartment in the area east of Kobe near a really expensive place called Ashiya. In 2003, Settsu-Motoyama (my area) was voted "fastest growing urban zone", meaning it's a combo of the nicest, cleanest, most convenient areas in Japan... hence the price.

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-632678
Share on other sites

I dig your sig, Dave... :)

Thanks mate! :)

Geez - 120,000 yen a month! Still I bet it's cool to live in a nice area. Don't get me wrong, there's nothing bad about being in the countryside but my youngest neighbour is way past retirement and I'm surrounded on all sides by old farm houses and even the odd mud brick house! :D Not to mention there's virtually no nite life...:(

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-632773
Share on other sites

hehehe. It aint all bad :D

What the Japanese term countryside is actually quite "urbanised" in my book. But, where I am now, it's about a 5 min drive into the mountains. Moutain roads means drfit action, especially on the weekends. They also mean very few traffic signals (in the cities you've got to put up with traffic jams and signals every 100m or so, something that really makes driving in the city a pain in the ass:()

in my spare time I often take a 5 min drive to my local racing circuit in the mountains and watch the racing/drift action :P

SLY_4.JPG

SLY_3.JPG

for me Tokyo is around an hour away by car, as is Mt. Fuji, Fuji Speedway, Yokohama and nagano for skiing...

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-634806
Share on other sites

the above photos are taken from my site. The circuit itself is growing, but it's essentially a RWYB circuit so you can see just about anything on the track, bikes and hondas included...:P

As a side note, thus far the fastest car I can recall seeing around the track was a seriously worked Subaru...FORESTER! :D

they also have a cool RC track aswell...

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-634811
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...