Jump to content
SAU Community

Recommended Posts

Hi all.

I've been building an R32 skyline up for over a year, I bought it as a shell and have done the following to it.

Resprayed in Lamborghini Grigio avalon (a darkish grey metallic), and it's the sunroof model

Fitted an Origin Streamline bodykit (full kit)

Have an M-Spec kit painted up in same colour (full kit)

Fitted an RB25DET Neo + R34 gearbox/clutch etc. The motor has done 64,000km and runs on the stock R34 ECU.

Put R33 GTR Brembo brakes front and rear, with new rotors on the rear, new brake pads all round

Got Volk GT-C rims with near new tires, 18 on the back 17 on the front

Fitted a Blitz return flow intercooler

Strut braces front and rear

It is nearly finished, just requires the windows to be put in, new quarter panel windows to be bought and a wheel alignment.

I've applied for and received approval for the engine conversion but it needs to have an emissions and noise test before final registration with the new motor can be given (however, it is currently still registered with the original RB20).

My problem is that my wife and I had our first child two weeks ago and she's now not working, so I can't afford to finish the car off and drive it like I wanted to. I may have to sell it as it is.

What sort of value would I be looking at if I sold it as it is?

Link to comment
https://www.sau.com.au/forums/topic/313319-my-r32-build-please-advise/
Share on other sites

i am with Damo on this.....prob around the $15K mark maybe higher or lower depends on the haggler and how badly you need to let it go.....also some pics of the build would be nice....as it sounds like a mean build

It will also need a full regency inspection for the engine conversion.

i thought you dont need to go to regency for engine conversions, all you needa do is tell transport SA or whatever its called these days? correct me if im wrong

i thought you dont need to go to regency for engine conversions, all you needa do is tell transport SA or whatever its called these days? correct me if im wrong

My 26 conversion had to have a full inspection, any chance in engine type should have to be inspected. If your just swapping an RB20 for another RB20 then you would probably just need to tell them. Things may have changed since my car went through though.

Edited by DSTROY
My 26 conversion had to have a full inspection, any chance in engine type should have to be inspected. If your just swapping an RB20 for another RB20 then you would probably just need to tell them. Things may have changed since my car went through though.

i put rb25 in r32 and i just had to fill out a form sayin the engine details about it so i guess it dosent need to go through, hope i dont get a call saying i have to go through lol

i put rb25 in r32 and i just had to fill out a form sayin the engine details about it so i guess it dosent need to go through, hope i dont get a call saying i have to go through lol

must be a new thing, my car was done in about 2006/7.

Hey guys, thanks for your input. I will put up some pictures if you like, I'll resize them and do it tonight.

DSTROY, thanks for the hint, I'm sorted with Regency/Inspections. I had to apply using the form Craig132 mentioned, then they notified me of the path I have to take, which is get an emissions test, noise test and brake test by an engineer. They have provided me with the necessary forms for this. Then I need to get Regency to verify the engine number and then it's all legal.

vspek, I will put up some pictures soon. It looks really nice, the paint is kinda dark grey with almost a purple tint in the shadows, but then a really popping bright silver in the light. I got the paint through Murray Bridge Paint and Decorator Centre, I just used acrylic lacquer and I did it all myself. I actually painted the car five times, trying out different shades of grey before I settled on the one I have now (yes I am completely pedantic and obsessive about my cars).

Thanks all.

Hey guys, thanks for your input. I will put up some pictures if you like, I'll resize them and do it tonight.

DSTROY, thanks for the hint, I'm sorted with Regency/Inspections. I had to apply using the form Craig132 mentioned, then they notified me of the path I have to take, which is get an emissions test, noise test and brake test by an engineer. They have provided me with the necessary forms for this. Then I need to get Regency to verify the engine number and then it's all legal.

vspek, I will put up some pictures soon. It looks really nice, the paint is kinda dark grey with almost a purple tint in the shadows, but then a really popping bright silver in the light. I got the paint through Murray Bridge Paint and Decorator Centre, I just used acrylic lacquer and I did it all myself. I actually painted the car five times, trying out different shades of grey before I settled on the one I have now (yes I am completely pedantic and obsessive about my cars).

Thanks all.

awsome, thanks! lookin forward to the pics :D

Here's some pictures :down:

The first few are how I bought the car, then there's a couple of the boot which I welded up the spoiler holes and show the guide coat etc. Then some of the M-Spec kit being done, then a photo of the car with the M-Spec kit on one with flash and one without flash (unpolished from painting). At this point in time I decided to fit a bodykit and bigger rims, so I rolled the guards and bought and painted an Origin kit. Then there's a couple of photo's of the car as it is in my shed now, just starting to polish it after paint so it will have a good gloss in a few weeks. Couple of photo's of the wheels/brakes too.

Sorry about the poor photo quality though, I'm no photographer and half of them are off my phone and the car is dusty as anything.

post-52798-1269895989_thumb.jpg

post-52798-1269896017_thumb.jpg

post-52798-1269896076_thumb.jpg

post-52798-1269896100_thumb.jpg

post-52798-1269896120_thumb.jpg

post-52798-1269896152_thumb.jpg

post-52798-1269896181_thumb.jpg

post-52798-1269896205_thumb.jpg

post-52798-1269896242_thumb.jpg

post-52798-1269896266_thumb.jpg

post-52798-1269896288_thumb.jpg

post-52798-1269896316_thumb.jpg

post-52798-1269896338_thumb.jpg

post-52798-1269896367_thumb.jpg

post-52798-1269896381_thumb.jpg

post-52798-1269896403_thumb.jpg

post-52798-1269896442_thumb.jpg

post-52798-1269896477_thumb.jpg

post-52798-1269896499_thumb.jpg

post-52798-1269896521_thumb.jpg

post-52798-1269896548_thumb.jpg

Thanks Damien, I'll file that information away.

I have it booked in to get the windows tinted tomorrow, then installed on the 18th of April. Engineering tests will take place the following week if I can get the time off work to take it down, then installation of the E-Boost and a brief check over by someone to verify everything has been done correctly.....then I'll drive it for two weeks to actually experience the car I've been building for over a year and a half, then it's up for sale.

So if all goes according to plan it will be on the market around the beginning of May. I'll include a full list of what's actually been done to it when the for sale thread is started. There's a fair bit I haven't mentioned such as the sound system details, custom fibreglass pods for the tweeters painted same as the car, etc etc.

Thank you all for your input.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...