Jump to content
SAU Community

Recommended Posts

Hi everyone

I have the following for sale:

2x Garrett GT2860R - 7 turbos. Bought late last year, these are near new and have not done more then 5000 km's or seen more then 16 psi boost. These are in immaculate condition and have no shaft play or defects whatsoever. Retail new is aprox 2.4k, I am chasing $1,900 These are the newer eddition of these turbos with the Inconel turbine wheel.

2x R34 N1 turbos - These are the older version of the 2860R -7, standard on the R34 N1 GTR. These have done aprox 25 000 k's and have also not seen more then 16 psi. They are in good to very good condition with minimal to no shaft play. I am chasing $1,400 for these turbos.

R32 GTR PowerFC /w Hand Controller - PowerFC /w hand controller, good condition, $800

R32 GTR front brakes /w near new Bendix Ultimate pads and near new DBA 4000 rotors - good condition, worked fine when I replaced them with 33 GTR brembos. $400.

Link to comment
https://www.sau.com.au/forums/topic/313320-4-x-turbos-powerfc-brakes/
Share on other sites

In brisbane.

Pics coming asap, stupid freaking iphone has packed up on me and I have no other camera.

As I said in the add, they have minimal to no shaft play. There are no nicks or cracks in any of the wheels, they are in remarkably good condition.

Edited by IanB

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did you pay with a credit card? I'd be putting a charge back through then finding a new sparky to sort it out. 
    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...