Jump to content
SAU Community

Recommended Posts

hey guys,

im not big up with bodykits.. i tend to stay away from them actually, but i require big fenders for my r32.. now i can find a few... like dmax and d1.. that come in my required size..

but i want the gap at the back end of them.. and an even gap.. the dmax ones have the gap at the top, but then taper back in to fit at the bottom.

i want it to look like this

0.jpg

i cant find any rear guards that sit like this for the r32.. plenty for the silvias.. i dont like the ones that mould back in to the body.. they look tacky and too round usually.

any help would be much appreciated... i know nothing about bodykits.

cheers

Linton

thanks.. they are only +25... i really need +30 at the very least.. +50 would be more ideal..

im undecided on the roof spoiler... they look good on s13s... need to see more on teh r32s i think.. theres a great looking dark blue one doing the rounds on speedhunters etc.. has the 5 spoke blitz wheels.. .looks fantastic.

You tried Rolling / Flaring the guards?

If the wheels are too wide then, I have seen ppl just rivet bolt on guards.

Looks like they went to a wrecker and just sliced the guard / rear panel / flared it out and bolt on.

141.jpg

143.jpg

Looks closely to the rears.

guards are rolled... and they fit sweet with the 17x9.5 +25mm... now i have 17x9.5 -0 and i want wide fenders..

i like the rivet on ones.. no mess, no fuss, just get em on and go.

they need to clear this

-02.jpg

yeh it is a bit to cover.. and thats with the stretched 235.. plan is to run grippy 255's all round for circuit. so thats why it will need the +50. fronts are 17x9 +25 which will fit gtr guards but 17x9.5 + 0 at the back will need fenders..

im thinking, and i may need to be shot down here...

but say i get the dmax, +30 rear fenders, and just space them out +20 at the back with 4 pieces of 20x20 aluminum square tube.. mould them in at the front and at the top.. and leave the back open a little bit..

otherwise i might just get some chopped rears, bash them into shape, then make a frp or c/f copy of them and rivet them on.

ohh i dont know.

god damn hippies..

thats true... but ill put the 255s on there tomorrow, remove the suspension and jack it up to where it should sit.. remember that pic is with 235s.. the 255s are a whole different kettle of fish.

farrrrrk that looks phat as albert dude... good job.. the verandah flares look full matsuri spec.. i love it, bet cops or your hands didnt though. viva garage kit seems to fit ok.. compared to others that ive heard of anyway.

after looking closely at the back end of the cusco wrx, i think ill use wide front fenders like dmax and a modified bolt on flare at the back.

its going on a pure track car, so not worried about doing it for police attention etc. just want the extra track and big rubber.

viva stuff is decent, fits up pretty good and is fairly flexible which is a good thing (hard kits break easily with a bit of pressure)

you think yours is gonna be hard to cover up... try 18x12 - 4 :P

mysky.jpg

those are 50mm bolt on flares on the back. still looking for some full sized bolt on guards for the 33 that actually look good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...