Jump to content
SAU Community

Mr Rann At Gilman

Minibats

By Minibats,
in South Australia

 Share

Recommended Posts

dark.sky Grand Master

dark.sky

Posted
Posted

Right next to the Speedboat Club.

Heaps of you guys have been to my house before, think about where my house is in relation to AIR/Speedway, because I can hear the sprint cars from here. Having said that, its only in certain weather conditions and Ive never heard it inside the house.

Having been to the proposed location, I would be suprised if it failed. TBH I reckon Taperoo and Osborne would be more likely to hear it than the port, but the prevailing wind comes from the SW, so it would blow the sound over water towards bolivar...

RubyRS4 Grand Master

RubyRS4

Posted
Posted

The EPA allow certain noise levels above ambient noise. So a drag strip may be loud, but can still be approved with the right buffer zone and noise level buffer above ambient.

:cool:

J_Red33 Experienced

J_Red33

Posted
Posted

^^ If the speed boats are making that much noise on a regular basis, surely it's not that big a deal for drag racing to occur once a month, especially with the sound barrier that would be around it.

Really want this to happen as well, would be nice just to take my line down to a drag strip just to see what it does. Not that I'm expecting heaps.... still would stop me being curious.....

Dohmar Grand Master

Dohmar

Posted
Posted
^^ If the speed boats are making that much noise on a regular basis, surely it's not that big a deal for drag racing to occur once a month, especially with the sound barrier that would be around it.

Really want this to happen as well, would be nice just to take my line down to a drag strip just to see what it does. Not that I'm expecting heaps.... still would stop me being curious.....

Personally I'd like to see the event be open every Friday and Saturday night, since those are the two days you really want to let off steam and go party - would be good if they were able to build a petrol station right outside the venue too, with e85, methanol, lpg, 98 oct, diesel, nos etc etc

-D

Dohmar Grand Master

Dohmar

Posted
Posted
sydney has wednesday night drags air used too as well

for sure, they have to have some kind of regular weekly events to justify the cost being spent on it - whats a speedway's use when its closed? bugger all eh, as we've found out since AIR closed...

they'll have to have some kinda schedule, keep the noisiest events for the daytime or during the weekends and then have general stuff like grip/drift prac during week nights - Im sure many people here would be weekly participants

-D

J_Red33 Experienced

J_Red33

Posted
Posted
Personally I'd like to see the event be open every Friday and Saturday night, since those are the two days you really want to let off steam and go party - would be good if they were able to build a petrol station right outside the venue too, with e85, methanol, lpg, 98 oct, diesel, nos etc etc

-D

Yeah would be good if it ran street meets fairly regularly, would come down to the amount of people turning up I guess & how much some locals bitch & moan if noise does turn out to be an issue (there always has to be one or 2. I wouldn't think there'd be a shortage of willing participants.

Dohmar Grand Master

Dohmar

Posted
Posted
Yeah would be good if it ran street meets fairly regularly, would come down to the amount of people turning up I guess & how much some locals bitch & moan if noise does turn out to be an issue (there always has to be one or 2. I wouldn't think there'd be a shortage of willing participants.

even if they had just a petrol station/ cafe-restaurant-diner / car wash / car park it'd be an ideal place for people to meet

provided the law respects the venue for what it is and doesnt simply use it as a cash net - this is dependant on what mister premier says too

thing is, you get the stuff that people want to have around for their cars ie petrol, a place for them to clean it, catch a bite, maybe even put in self serve garages with hoists similar to the rentable garages at lala...

possibilities are endless

-D

DIOR 33 Veteran

DIOR 33

Posted
Posted
Right next to the Speedboat Club.

Heaps of you guys have been to my house before, think about where my house is in relation to AIR/Speedway, because I can hear the sprint cars from here. Having said that, its only in certain weather conditions and Ive never heard it inside the house.

Having been to the proposed location, I would be suprised if it failed. TBH I reckon Taperoo and Osborne would be more likely to hear it than the port, but the prevailing wind comes from the SW, so it would blow the sound over water towards bolivar...

that would be a great location for the track

Im down near pelican point road and we can hear the speed boats on the weekends very clearly most events, thing is I can put up with the odd event of drags or race cars.

Most of you know where i live and i hear the speed boats very clearly but i wouldnt care if i heard drags ect, its not like it would be after midnight and it would be on weekends

Its no different to the drag strip on victoria rd anyway lol

Dohmar Grand Master

Dohmar

Posted
Posted
that would be a great location for the track

Most of you know where i live and i hear the speed boats very clearly but i wouldnt care if i heard drags ect, its not like it would be after midnight and it would be on weekends

Its no different to the drag strip on victoria rd anyway lol

thats so true. 12pm is the curfew for most noise, and I believe private parties are able to continue to 3am in most suburbs depending on noise levels of course

if this was to go ahead, id be seriously considering investing in some kind of small business like a cafe/car wash venue.... could even have a bunch of simple 8x4 portable rooms leased out to the assorted car clubs across sa, ie the evo grp, hsv, sausa, supra grp, porsche club etc

would be an excellent alternative to renting out private property around the suburbs

-D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • GTSBoy
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By GTSBoy · Posted

      That's hilariously putrid!
×
×
  • Create New...