Jump to content
SAU Community

Recommended Posts

hey guys not sure if this is the right place to post this but i have recently picked up my R34 GTT with very minor modifications to the engine and for some reason for the past 3 days in a row as i am driving or stopped at traffic lights it has seems to stall...

at first i thought typical RB (random bullshit) ;)

but now im not sure. i know the batt is on its way out but i didnt think that could make it do this??

it on has a KN air filter on it and thats about it...

any help or ideas or if this has happen to anyone else please let me know.

thanks heaps in advance for any advice :)

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/
Share on other sites

Do you have an aftermarket atmospheric blow off valve? Put the stock one back on and your problem is fixed.

Or try cleaning the AAC(Auxiliary Air Control) valve... it bypasses some air through when your foot is off the throttle.

And maybe clean your air flow meter with some electrical contact cleaner.

There is a tutorial on how to clean the AAC valve in the DIY section of the forum, just search.

Edited by SKYRYAN
Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5159213
Share on other sites

How do you know the battery is on it's way out? Could be the alternator...

Could also be a bad earth..

My stag was having trouble starting in the mornings and would randomly cut out or stall at lights, thought the alternator was dying.. turned out it was one of the earth leads back to the battery, the wingnut that was holding it onto the clamp was loose :D

Edited by bubba
Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5160944
Share on other sites

Could also be a bad earth..

My stag was having trouble starting in the mornings and would randomly cut out or stall at lights, thought the alternator was dying.. turned out it was one of the earth leads back to the battery, the wingnut that was holding it onto the clamp was loose :(

Very true.

If the battery is dying that could well be a symptom. Check the battery and alternator with a multimeter, make sure you aren't missing any volts between the alternator and the battery. If there are more volts at the alternator then there are at the battery, check your earth and positive wiring, could be a bad connection or corrosion.

Alternator should be producing 14.2v while charging

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5160976
Share on other sites

^^^ thanks for your thoughts, my fiance got home last night and the batt terminal for the power was corroded, so he cleaned it up and it found to be loose so that would explain things. it hasnt missed a beat today which is great :(

as for the wheels they came with the car, dont worry in the future there will be some jap rims on there :D

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5161274
Share on other sites

well here is an update. it was fine for nearly 2 days because he cleaned the terminals and tightly sercured the terminal as it was a little loose after getting rid of the corrosion and then last night as we were going for a drive it happened AGAIN :(

we were travelling at 60 in 5th in a residential area and then all of a sudden the car lost a little bit of power and the slip light came on.... but it was only that light!! it was weird cause we have already been driving for at least 1 or 2 hours...

any light in this would be great, now i know the batt is still not the best but thats getting replaced next week.

thanks guys :P

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5163318
Share on other sites

Take it to a specialist garage. If the slip light is coming on but you aren't breaking any traction then you could have error codes. They can run a scan for you and find out.

Oh and at least put stock GT-T wheels on instead of those massive heavy abortion bling things hanging off your nice car.

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5163437
Share on other sites

Take it to a specialist garage. If the slip light is coming on but you aren't breaking any traction then you could have error codes. They can run a scan for you and find out.

Oh and at least put stock GT-T wheels on instead of those massive heavy abortion bling things hanging off your nice car.

stop hatin the chicks wheels. she might like them get the f**k over it! or do u need another beating at a set of lights?

Edited by dose_it
Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5164629
Share on other sites

stop hatin the chicks wheels. she might like them get the f**k over it! or do u need another beating at a set of lights?

Haha ooh big threat alert Ladies and Gentlemen! Because you driving someone elses built car is going to settle it? Or do you need a life rather than spending nights at traffic lights...?

Muppet.

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5164816
Share on other sites

Haha ooh big threat alert Ladies and Gentlemen! Because you driving someone elses built car is going to settle it? Or do you need a life rather than spending nights at traffic lights...?

Muppet.

I'm a muppet am I? Who cares If someone built my car it's a cefiro good luck findin a stock one and I'd hardly call it built when it's got a 250 horse sr20 coilovers and a bodykit that just manages to chirp 3rd. Ha yep that's it I just spend hours cruising from lights to lights hoping to race standard skylines I was honestly to busy perving on ur ex missus.

But seriously who cares if she has chrome wheels. Ur the only person who can relate a stall problem to rims so maybe in reality your the muppet

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5164852
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...