Jump to content
SAU Community

Recommended Posts

Hey,

Im 18 and getting myself a skyline soon, I was supposed to get it earlier but they f**ked up the compliance paper work and now they delayed the arrival...

So, I was thinking, being young as I am i should make sure to do all my speeding on a track, but I don't have a cams license so im not sure what i am and am not, allowed to do.

What can u do without a CAMS license on tracks such as eastern Creek?

And what would I have to do to get a CAMS license?

I hear that the L2S is the most common and required CAMS license, is that right? What does this allow me to do?

Is SAU an CAMS affilicated club?

Please dont link me to the CAMS website, Ive looked there but i know personal experience from club members will be much easier to understand and more relevant to my actual application of the license.

Link to comment
https://www.sau.com.au/forums/topic/314652-cams-license/
Share on other sites

CAMS L2S will let you do sprint events at many race tracks. LAtely a lot of people are using the AASA licence for track days and such (same price - $55 for a 12 month licence).

Either of those should let you do the kinds of events you'd be looking at.

Good on you for having the maturity to take it to the track. :(

Link to comment
https://www.sau.com.au/forums/topic/314652-cams-license/#findComment-5161013
Share on other sites

ok I'll try in order.

There isn't much you can do without a CAMS licence on the tracks.

To get a CAMS licence you need to be part of a CAMS affiliated club and then fill out some paperwork and pay some money.

L2S is the most common and lets you do most of the non-door to door speed events. I.E. Track days etc. full clarification is on the CAMS website. I wont link it.

SAU NSW is CAMS Affiliated. They have a section of the SAU forum just for members. SAU (the forum) in general, is not CAMS affiliated.

And good on you for having intentions on heading to the track.

Link to comment
https://www.sau.com.au/forums/topic/314652-cams-license/#findComment-5161014
Share on other sites

You will need a L2S to get onto Eastern Creek. Cheapest option is a private practice day. They hold them about every month. Check out easterncreek raceway website for dates & prices.

If you want to get on a race track without worrying about club membership, Cams licence etc, just to get started, you can look at Wakefield Park - Speed off the streets day.

Check out their website for prices and dates. You can buy a 12mth Wakefield Licence for about $50 and then pay about $100 to get access to the track.

Wakefield Park is a good starting point for beginners as it is very safe with plenty of run off, is a tighter circuit and not as high speed as Eastern Creek.

There is nothing like driving your Nissan on a race track. Go for it!

Edited by nismoman
Link to comment
https://www.sau.com.au/forums/topic/314652-cams-license/#findComment-5161104
Share on other sites

SAU NSW are running a beginner's track day at Wakefield Park on 18 June. Its a great chance to get out there with an instructor in the passenger seat (very unusual with current insurance rules) and a great way to learn. Wakefield Park runs under AASA not CAMS (generally) which is about half the price of CAMS.

Once you have done a day or 2 most people move on to super sprints which require a CAMS L2S. Given Eastern Creek is the only track in sydney you will need the CAMS license sooner or later.

Link to comment
https://www.sau.com.au/forums/topic/314652-cams-license/#findComment-5161810
Share on other sites

  • 3 weeks later...

Thanks for all the information, looks like i will be getting myself a L2S then, and i'll also check out Wakefield Park about those beginners days, thank a lot for the information guys =)

Also, is there any testing or anything else in order to get a CAMS license? Because I thought it was like a course thing where you were tested afterward, it seems a little dangerous to just be handing out these licenses to speed isnt it?

I was also looking forward to being properly taught how to take high speed corners and such

Link to comment
https://www.sau.com.au/forums/topic/314652-cams-license/#findComment-5186587
Share on other sites

the full race licenses require observed driving tests and medicals, but L2S is intended as a beginner's license and does not include those requirements. It restricts the events you can enter until you obtain the higher licenses

Link to comment
https://www.sau.com.au/forums/topic/314652-cams-license/#findComment-5186605
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...