Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 months later...

Sorry guys, been out of the country so much this year and i'm back now for at least a few months.

Updating this thread, rods and pistons sold, everything else still available.

Items located in Brisbane.

Bare Head, just rebuilt, new seats, valve grind, light port, hardness checked, smoothed bowls $1000 Great for 25/30 swap!! Can provide std cams, includes cam covers and valley cover, recently powder coated.

Tomei Poncams 256 inlet/exhaust 8.5mm lift $700 includes adjustable cam gears

Performance springs to suit above cams and capable of controlling 10mm+ lift $200

6Boost manifold to suit GT25 flange on the HKS3037 turbo $800. Changing from another aftermarket manifold to this, picked up 30hp alone with no changes to boost or timing!!!! Suit turbosmart wastegate. Ceramic coated by Competition Coating

HKS 3037S 56T with 0.74 ex housing. This is rated at 480hp. My engine was making 430rwhp on 19psi on PITS dyno. I will include all the dash fitting and lines for this to bolt up to your 25. This is oil & water feeds and returns and oil return to sump. You need to tap your block for these to fit. Will also throw in the 3 inch dump from turbo to under the car, suits S13 series car although i imagine it would also fit a R33 but you' need to check it.

Turbo has just been rebuilt by GCG after a gasket failure, and has done barely 50km. Exhaust housing also cermaic coated by Competition Coatings. This thing is brand new again! Grab yourself a bargain, get the real HKS item $2500

Turbosmart Progate 48mm wastegate $400

Ryal inlet manifold, individually machined bellmouths, standard tb 5.2 litre capacity, injector holes modified to suit top feeds. $1000

550cc injectors with fuel rail $700 New o rings as of last month!

UPDATE

RB25 Head just rebuilt, new seats, valve grind, exhaust valves guides light port includes Performance Springs with standard cam$1000 Great for 25/30 swap!!

Tomei Poncams 256 inlet/exhaust 8.5mm lift $700 includes adjustable cam gears SOLD

6Boost manifold with GT25 flange, ceramic coated $800

HKS 3037S 56T with 0.74 ex housing $2500

Turbosmart Progate 48mm wastegate $400

Turbo, 6boost & wastegate package $3000

Ryal inlet manifold, individually machined bellmouths, 5.2 litre, injector holes modified to suit top-feeds incl fuel rail $800

550cc injectors$600

  • 1 month later...

This stuff needs to go.

I'll now offer the lot for $3500, complete top end package, rebuild head new turbo great manifold, come get yourself a bargin.

[email protected] email me if you still have the manifold

This stuff needs to go.

I'll now offer the lot for $3500, complete top end package, rebuild head new turbo great manifold, come get yourself a bargin.

This stuff needs to go.

I'll now offer the lot for $3500, complete top end package, rebuild head new turbo great manifold, come get yourself a bargin.

Just re-stating, the head has less than an hour since rebuild, light port new valves stems exhaust guides and performance springs.

6 boost manifold with GT25 flange for HKS turbo

HKS 3037S56T -rated at 480hp. Rebuilt, has done less than 1 hour.

Turbosmart 48mm progate.

Ryall inlet manifold, individual bell-mouths and modded to accept top feed injectors.

Included -all water/oil lines for turbo are real aircraft braided lines and fittings.

$3500 the lot!!

Edited by Simonster
Are the injectors included? What brand are they?

They weren't, but if you want the lot, then i'm prepared to throw them in for another $200.

They are series 5's purchased from Mazfix

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...