Jump to content
SAU Community

Recommended Posts

Hi guys,

So my motor is on its way out so im stripping the DE+T bits as i am rebuilding and chasing for more power.

Good chance for you NA boys to get some boost into your car.

1) $500

Turbonetics T3/T04E turbo with 3" inlet.

.50 A/R

Oil cooled (no need for messy water lines)

excellent condition, no shaft play & does not blow smoke

5 bolt style rear housing with custom made dump (weld onto your own front pipe)

Rear housing has been modded to fit 38mm external gate *****may be able to supply a IW rear housing****

tbim8.jpg

snc00066c.jpg

**pics of wastegate fitted is at the bottom**

2) $60

Custom alloy intake from TB > cooler pipe with bov mount welded on (RB style flange) sprayed black for stealth look

14cqpt0.jpg

3) $50

Custom braided oil line to suit turbo > oil pressure sender side of engine + Tee piece fitting

4) $80

R34 GTT injectors

5) $80

R33 GTR fuel pump (great upgrade for any skyline GTS/GTST/GTT)

6) $50

600x300x75mm intercooler core, minor bent fines but can easily be fixed with pliers

7) $200

38mm turbosmart ultragate with 7psi spring + screamer (heat wrapped with exhaust wrap)

2hp60qx.jpg

8) $30

Stock RB20/25DET manifold

9) $80

RB25DE/T Green label AFM

This kit came off a R34 GT so will be a direct bolt on to a R34 RB25DE, i assume it would be the same/similar for a R33 RB25DE.

Willing to sell as a package or parts on their own.

Package price;

Turbo,gate/screamer, custom dump, custom braided oil line for $700

At 14psi, it made 210rwkw @ 550nM of torque, tuner said there is heaps more room for power but i was limited by the stock injectors, AFM & NA compression.

Located in Sydney, Pics upon request of other items.

Postage is not a problem, contact for prices.

Video of it in action;

PM if interested.

Thanks

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...

manifold & intercooler sold

UPDATE of whats left!!

R34 RB25 AFM $80

Custom front pipe $50 - just needs to be flanged on dump side, Suit R33/R34

R34 RB25DET NEO Stock injectors $80

Apexi Pod filter $50

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...