Jump to content
SAU Community

Recommended Posts

Hi guys,

So my motor is on its way out so im stripping the DE+T bits as i am rebuilding and chasing for more power.

Good chance for you NA boys to get some boost into your car.

1) $500

Turbonetics T3/T04E turbo with 3" inlet.

.50 A/R

Oil cooled (no need for messy water lines)

excellent condition, no shaft play & does not blow smoke

5 bolt style rear housing with custom made dump (weld onto your own front pipe)

Rear housing has been modded to fit 38mm external gate *****may be able to supply a IW rear housing****

tbim8.jpg

snc00066c.jpg

**pics of wastegate fitted is at the bottom**

2) $60

Custom alloy intake from TB > cooler pipe with bov mount welded on (RB style flange) sprayed black for stealth look

14cqpt0.jpg

3) $50

Custom braided oil line to suit turbo > oil pressure sender side of engine + Tee piece fitting

4) $80

R34 GTT injectors

5) $80

R33 GTR fuel pump (great upgrade for any skyline GTS/GTST/GTT)

6) $50

600x300x75mm intercooler core, minor bent fines but can easily be fixed with pliers

7) $200

38mm turbosmart ultragate with 7psi spring + screamer (heat wrapped with exhaust wrap)

2hp60qx.jpg

8) $30

Stock RB20/25DET manifold

9) $80

RB25DE/T Green label AFM

This kit came off a R34 GT so will be a direct bolt on to a R34 RB25DE, i assume it would be the same/similar for a R33 RB25DE.

Willing to sell as a package or parts on their own.

Package price;

Turbo,gate/screamer, custom dump, custom braided oil line for $700

At 14psi, it made 210rwkw @ 550nM of torque, tuner said there is heaps more room for power but i was limited by the stock injectors, AFM & NA compression.

Located in Sydney, Pics upon request of other items.

Postage is not a problem, contact for prices.

Video of it in action;

PM if interested.

Thanks

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...

manifold & intercooler sold

UPDATE of whats left!!

R34 RB25 AFM $80

Custom front pipe $50 - just needs to be flanged on dump side, Suit R33/R34

R34 RB25DET NEO Stock injectors $80

Apexi Pod filter $50

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...