Jump to content
SAU Community

Recommended Posts

Snow button, where the heck is it? (r34 auto)

Also do you think traction control kicks in to save you when being foolish?

i have a R33 auto so i cant comment about the 34's

but 4 me its in the center consul between the shifter and the storage area. its good because along with 2nd gear take off it also keeps the trans from going into power mode on its own witch can be a bit of a pain eg why are u shifting at 4000-5000rpm oh u when in to power mode grrrr.

touch wood i have not lost traction since starting this thread so the extra psi and driving like a granny must b helping

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

the way i look at it , still alot safer in a skyline with RWD or any car with RWD for that matter, than any FWD car, lol , but yer im new to the whole boost and rwd in the wet , and still learning how to drive safely in the wet , but all im doing and same advice as said before, just slowing down abit sooner, leaving more braking distance between you and other cars, and taking off abit slower, seems to be working pretty well at the moment :laugh:

My stag has a Snow Mode button AND a 50/50 torque split button, but with the laggy turbo I have to try real hard to get it loose and even then it's like 0.5secs of OMG IT SPUN before the 4wd just rockets you down the road!

Can't wait for the skyline to be back on the road.. I miss pedalling it in 3rd trying to find some traction in the wet :ermm:

Edited by bubba
lol...no offence but my mum could drive a commonwhore V8 in the wet. Unless they're their angried up they are slugs.

No offense taken Say what you like but considering there are auto r33 and nonners 300 drivers on here whinging about traction makes me wonder..

No offense taken Say what you like but considering there are auto r33 and nonners 300 drivers on here whinging about traction makes me wonder..

Oh, and I would just like to point out that I now drive a manual houseboat. The auto is now in a pickles yard somewhere. My sig lies!

New 'Line yeah !!!!!11ty well?

Skidpan...fail dude. 3 weeks ago lol. Check the members area. Next time there's one on I'll pm you

Yeah mate totally! I'll post some pics on show'n'shine when I take some tomorrow. Bought it from Alistair at Autoworx. Nice bloke :) The reputation is warranted. It's another RB25DET - but it's manual, white, and a few toys under the hood.

I have 225's with michelin tyres all round, havent broke traction since, only when i wanted to. which was once when it first rained (will have to go to one of these wet skidpan thingies). Im really careful when i accelerate in 1st and 2nd gear, and barely let it hit boost. then slowly progress up to 4th or 5th gear. and take it really careful around corners, also try to use as much of the road as i can when cornering, (race inspired.. haha) so it doesnt put too much strain on the little tyres.

+1 for Decent set of tyres.

When i bought my GT-R it had terrible Nankangs on it.

Going from Brisbane to the sunshine coast over here in QLD i put my GT-R in RWD before it started raining and accelerating from 110 - 120ish it tried to send me backwards down the motorway.... in 5th gear.

When in AWD though traction allows you to annhilate anything and everything.

Cheers,

Mitch.

Edited by Nee-san

Sounds like I need new tires lol

I basically granny it everywhere in the wet, anything over about 3000rpm loses traction in 2nd, and I lose traction in 3rd well before 4000rpm in a pretty much stock r33

Scariest moment was when my sister was driving it down a hill in heavy rain, took a good 100 metres to stop from 60kmph because she was braking too hard and spent most of the time sliding down the hill. We came to a stop about 4 metres before the roundabout

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...