Jump to content
SAU Community

Recommended Posts

I have another post in regards to selling this engine as a whole, but cant be bothered waiting now so im just gonna start parting it out now, still wiilling to sell the engine as a whole if anyone interested but heres the list.

(the head is still attached to the block but will take apart if there are buyers for it otherwise ill keep it together until it does get sold)

If my prices are unjust just throw me an offer and we'll see, bu no low balling offers plz, will post some parts and maybe larger items if u organise the courier.

Head incl: complete except for the bolts holding in the rocker covers, also missing the bolt that holds the vct bit on the intake cam gear. $400

Block: Pistons still in just needs head if you are not buying the head i have no pumps, has water pump and water pump, i knw the water pump is still in vgc, havent taken oil pump yet but should be fine to use again. $500

Power steering pump with bracket: vgc no problems. $50

Alternators x2: ones an rb30 one is bit dirty, both work fine. $100 each

stock exh manifold: vgc $50

Intake plenum + runners + throttle body +tps series 2: vgc comes with bolts and gaskt for it. $110

Tomei metal head gasket: brand new 87mm and 1.2mm thick. $400

OS giken / Cusco super single clutch: roughly 75-85% meat left on it the plates look fine was running great on the car b4 taking it off. $600 ono

So far thats all i can think of if i think of anything else ill add it later or just ask me wat u want i might have it.

Pm or txt to my mob 0414424902

Cheers

Lok

OK need to pay for my new ecu n tune so i need as much of this gone asap

also

Series 2 coilpacks for rb25det $110ono

rb20det coilpacks $70

hello, id be keen on coil pack loom if good,./ injector/injectors../coils packs/ turbo/?

hey mate i only have the coilpacks in ur list sorry, might have the inj loom but yea if ur keen pm me or gimmie a txt if u can pm

bump

the block is on hold atm but the head is still attached, will knw by around monday arvo if its sold or not.

the guy hasnt gotten back to me yet so i assume his not wanting it so the block is still avail (with head still attached)

will swap for slotted front rotors for r33 gtst maybe cash adjustment depending on what you want

some items will post for free depending on what you want

Hey mate, will you sell the throttle body seperate from the manifold?

hey mate i prob wont want to separate it would like to keep it whole in case someone wants the whole thing.

any idea what the clutch is rated to?

hey mate i got 304rwkw on my car and held it fine didnt slip at all. but apparently its rated to 400ps

I have another post in regards to selling this engine as a whole, but cant be bothered waiting now so im just gonna start parting it out now, still wiilling to sell the engine as a whole if anyone interested but heres the list.

(the head is still attached to the block but will take apart if there are buyers for it otherwise ill keep it together until it does get sold)

If my prices are unjust just throw me an offer and we'll see, bu no low balling offers plz, will post some parts and maybe larger items if u organise the courier.

Head incl: complete except for the bolts holding in the rocker covers, also missing the bolt that holds the vct bit on the intake cam gear. $400

Block: Pistons still in just needs head if you are not buying the head i have no pumps, has water pump and water pump, i knw the water pump is still in vgc, havent taken oil pump yet but should be fine to use again. $500

Power steering pump with bracket: vgc no problems. $50 SOLD

Alternators x2: ones an rb30 one is bit dirty, both work fine. $100 each

stock exh manifold: vgc $50

Intake plenum + runners + throttle body +tps series 2: vgc comes with bolts and gaskt for it. $110 SOLD

Tomei metal head gasket: brand new 87mm and 1.2mm thick. $400

OS giken / Cusco super single clutch: roughly 75-85% meat left on it the plates look fine was running great on the car b4 taking it off. $600 ono

RB25DET series 2 AFM: vgc $100

So far thats all i can think of if i think of anything else ill add it later or just ask me wat u want i might have it.

Pm or txt to my mob 0414424902

Cheers

Lok

hey mate i got 304rwkw on my car and held it fine didnt slip at all. but apparently its rated to 400ps

Im aiming for 350rwkw so that clutch dosnt leave me a lot of head room.

Im aiming for 350rwkw so that clutch dosnt leave me a lot of head room.

thats alright mate no probs, ur prob better getting a twin plate for that power to be safe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...