Jump to content
SAU Community

Recommended Posts

Black Nissan Skyline GTR R32 Roller with Andra Spec 4 Point Cage & Side Intursion Bar

Unfinished project selling due to other projects

$6000.00

0401 040 547

0421 552 175

[email protected]

Please contact via email or phone the above numbers for any further questions or to arrange an inspection

post-55360-1271593323_thumb.jpg

post-55360-1271593917_thumb.jpg

post-55360-1271593979_thumb.jpg

post-55360-1271594049_thumb.jpg

post-55360-1271594098_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/317231-nissan-skyline-gtr-32-roller/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
sorry mate don't want bits lying around every where....

the whole thing has got to sell together as one

no chance on 6grand then, complete ones are now around the 10 mark.

well it already fitted out with an andra spec approved cage and is in great condition

perfect for the right person who wants to make a show car out of it

My intentions were a 10sec or less show condition streeter...

Engine is for sale separately it is a 26/30

well it already fitted out with an andra spec approved cage and is in great condition

perfect for the right person who wants to make a show car out of it

My intentions were a 10sec or less show condition streeter...

Engine is for sale separately it is a 26/30

looks like a bold in cage, cut and welded, without any proper floor bracing... wouldnt even pass cams.

your intentions are irrelivent to the asking price as well as the motor being for sale seprate.

when you come to realise 6grand is rediculouse and willing to split or even negotiate PM me.

Intentions are relevent when discussing the engine for sale and also to explain why the car has been tripped and engine out also...

The cage is welded in not bolt in

  • 2 weeks later...
well it already fitted out with an andra spec approved cage and is in great condition

You could get Brown Davis to make a more comprehensive cage than that for a 1000 bucks.

It wouldnt be rusty and it would actually have a diagonal or 2.

Keen to know why it only has one side intrusion???

  • 3 weeks later...

Black Nissan Skyline GTR R32 Roller with Andra Spec 4 Point Cage & Side Intursion Bar (street legal, mod plate required

Unfinished project selling due to other projects

$6000.00

ALSO AVAILABLE TO COMPLETE THE PRJECT

RB26/30 ENGINE

The engine is unused and still wrapped up from workshop

Block has been modified for a sump adapter, decked, bored & line bored, mains have been modified for GTR bearing, ARP main studs, ARP head studs, oil gallerys have been modifed and grub screwed, sump is a custom 7L high octane, crank has been lightened balanced and grub screwed, spool rods, arias ceramic coated pistons, ACL race bearings...

Price $6000.00 not negotiable (machine work was $4500.00 alone)...

TRUST 6 SPEED DOGBOX $6000.00

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...