Jump to content
SAU Community

Recommended Posts

  • Replies 199
  • Created
  • Last Reply

Top Posters In This Topic

$4200 for the normal ones, TE37 SL $3300 delivered!!!

Remember these new TE37 SL is STRONGER & LIGHTER

sounds great.

have you got any details on exactly how much these wheels weigh?

cheers

ooooooohhhhhhhh :ermm::);):D I want I want I want.

18 x 9.5 ( Front ) 18 x 10 ( rear ) offset + 15

I think/hope this should be a good offset for a 34 GTR .... Will drop in on Tuesday afternoon with a deposit and hopefully some reassurance that the sizes and offsets will be correct.

am I on the right track with sizes and offsets anyone ???

gtr needs same width of rim so get them both 18x10 in what ever offset

they need to be the same so u dont f*k up ur attesa system

I always thought it was the rolling diameter of the rims/tyres which needed to be the same and that width did not matter. Obviously if the rolling diameters are different the atessa will be detecting what it thinks is wheel spin.

Any ideas anyone ? Also on the offset +15 good or no good for 34GTR

sounds great.

have you got any details on exactly how much these wheels weigh?

cheers

Anyway in terms of weight, i found out they are 1 pound lighter per wheel (vs older te37's) which is almost half a kilo, which is good.

+15 is going to look great, go for the 18x10 front and rears :)

Many thanks for the advice N1GTR .... I will order the 18 X 10 +15 Do you know if I Will I be able to run those sizes and offset without any guard rolling etc..... ?

interested in staggered

10.5 and 9.5 (+22 all round)

delivered to sydney.

have to ask ..any chance of custom colour ,black????? extra cost??

$3300 +$80 delivery if in metro of Sydney.

Sorry no chance of custom colour, if you want custom colour then you can go for the normal TE37 for around $4400 :D




  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...